High-Sensitivity and Low-Hysteresis QC-IDE Humidity Sensor Based on GO/Nafion Hybrid Film
- 23 February 2026
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-12
Abstract
To enable reliable detection of dynamic humidity variations under complex environmental conditions in meteorological applications, there is an increasing demand for humidity sensors that combine high sensitivity with low hysteresis. In this study, a humidity sensor was prepared based on a quartz crystal in series with interdigital electrode (QC-IDE) structure. The sensor realizes humidity sensing through the resistance-capacitance modulation mechanism: the GO/Nafion composite material is dropped on the IDE surface to form a humidity sensitive film. The variation in ambient humidity induces adsorption or desorption of water molecules on the QC-IDE humidity sensor, thereby modulating its equivalent resistance and capacitance and consequently shifting its resonant frequency. The experimental results show that the sensor with GO/Nafion mass ratio of 3:25 has the best performance. The sensitivity is 89.54 Hz/%RH, the humidity hysteresis is 0.39% RH, and the response/recovery time is 12 s and 4 s, respectively. The humidity sensing performance of the sensor may be attributed to the fold morphology and hydrophilic functional groups of the GO/Nafion sensitive film, which together provide a large specific surface area and enhance the adsorption of water molecules. In addition, the sensor showed good repeatability and stability. This study provides a feasible technical approach for the fabrication of humidity sensors with high sensitivity and low hysteresis.Keywords
Funding Information
- National Key Research and Development Program of China (2023YFB3210204)
- Natural Science Foundation of Sichuan Province of China (2024NSFSC1429)
- Fundamental Research Funds for the Central Universities (2682024ZTPY046)
This publication has 36 references indexed in Scilit:
- Design and Optimization of Metal Oxide-Based Humidity Sensors: A Review on Mechanisms and Material EngineeringJournal of Cluster Science, 2025
- Rapid detection of nucleic acid sequences of pathogenic bacteria based on a series piezoelectric quartz crystal sensor with transcription activator-like effectorsBiosensors and Bioelectronics, 2023
- Vacancy defects reducing the accuracy and reliability of NTC sensorsCeramics International, 2023
- Graphene quantum dots: A review on the effect of synthesis parameters and theranostic applicationsColloids and Surfaces B: Biointerfaces, 2022
- Temperature drift modeling and compensation of capacitive accelerometer based on AGA-BP neural networkMeasurement, 2020
- Modified graphene oxide/Nafion composite humidity sensor and its linear response to the relative humiditySensors and Actuators B: Chemical, 2018
- Capacitance-type MWCNTs/SiO2 humidity sensor based on capillary condensation and percolation theorySensors and Actuators A: Physical, 2017
- Elaboration and characterization of novel humidity sensor based on micro-carbonized bamboo particlesSensors and Actuators B: Chemical, 2017
- Investigation of the stability of QCM humidity sensor using graphene oxide as sensing filmsSensors and Actuators B: Chemical, 2014
- The study and application of a new IDE–PQC sensorSensors and Actuators B: Chemical, 2007