Effect of Composition on the Mechanical Properties and Wear Resistance of Low and Medium Carbon Steels with a Biomimetic Non-Smooth Surface Processed by Laser Remelting
Open Access
Abstract
To study the effect of laser biomimetic treatment on different material compositions, five kinds of steels with different carbon element contents were studied by laser remelting. The characteristics (depth, width), microstructure, hardness, tensile properties, and wear resistance of the samples were compared. The results show that when the laser processing parameters are fixed, the characteristics of the unit increase with an increase of carbon element content. Moreover, the hardness of the unit also increases. Compared with the untreated samples, when the carbon content is 0.15–0.45%, the tensile strength of the laser biomimetic samples is higher than that of the untreated samples. For the biomimetic samples with different carbon content, with an increase of carbon content, the tensile strength increases first and then decreases, while the plasticity of the biomimetic samples decreases continuously. The bionic samples have better wear resistance than that of the untreated samples. For bionic specimens with different carbon elements, wear resistance increases with an increase of carbon element content.Keywords
This publication has 28 references indexed in Scilit:
- Mechanical properties of several laser remelting processed steels with different unit spacingsApplied Surface Science, 2014
- Comparison of thermal fatigue behaviour and microstructure of different hot work tool steels processed by biomimetic couple laser remelting processMaterials Science and Technology, 2013
- Functional characteristics of dragonfly wings and its bionic investigation progressScience China Technological Sciences, 2013
- Particle Erosion Resistance of Bionic Samples Inspired from Skin Structure of Desert Lizard, Laudakin stoliczkanaJournal of Bionic Engineering, 2012
- Adhesion, friction, and compliance of bio-mimetic and bio-inspired structured interfacesMaterials Science and Engineering: R: Reports, 2011
- Investigation of microstructure, natural frequencies and vibration modes of dragonfly wingJournal of Bionic Engineering, 2011
- Review paper: Surface Modification for Bioimplants: The Role of Laser Surface EngineeringJournal of Biomaterials Applications, 2005
- State of the Art in Laser Surface TexturingJournal of Tribology, 2005
- Laser beam machining (LBM), state of the art and new opportunitiesJournal of Materials Processing Technology, 2004
- Heat transfer model for cw laser material processingJournal of Applied Physics, 1980