GCGeng Chang

Geng Chang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Geng Chang has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Bionic Repair of Thermal Fatigue Cracks in Ductile Iron by Laser Melting with Different Laser Parameters

    by Siyuan Ma, Ti Zhou, Hong Zhou, Geng Chang, Benfeng Zhi, Siyang Wang

    Nodular iron brake discs typically fail due to serious thermal fatigue cracking, and the presence of graphite complicates the repair of crack defects in ductile iron. This study presents a novel method for remanufacturing ductile iron brake discs based on coupled bionics to repair thermal fatigue cracks discontinuously using bio-inspired crack blocking units fabricated by laser remelting at various laser energy inputs. Then, the ultimate tensile force and thermal fatigue crack resistance of the obtained units were tested. The microhardness, microstructure, and phases of the units were characterized using a digital microhardness meter, optical microscopy, scanning electron microscopy, and X-ray diffraction. It was found that the units without defects positively impacted both the thermal fatigue resistance and tensile strength. The unit fabricated at a laser energy of 165.6 − 15 + 19 J/ mm 2 had sufficient depth to fully close the crack, and exhibited superior anti-cracking and tensile properties. When the unit distance is 3 mm, the sample has excellent thermal fatigue resistance. In addition, the anti-crack mechanism of the units was analysed.


  • Open Access

    Effect of Composition on the Mechanical Properties and Wear Resistance of Low and Medium Carbon Steels with a Biomimetic Non-Smooth Surface Processed by Laser Remelting

    by Geng Chang, Ti Zhou, Hong Zhou, Peng Zhang, Siyuan Ma, Benfeng Zhi, Siyang Wang

    To study the effect of laser biomimetic treatment on different material compositions, five kinds of steels with different carbon element contents were studied by laser remelting. The characteristics (depth, width), microstructure, hardness, tensile properties, and wear resistance of the samples were compared. The results show that when the laser processing parameters are fixed, the characteristics of the unit increase with an increase of carbon element content. Moreover, the hardness of the unit also increases. Compared with the untreated samples, when the carbon content is 0.15–0.45%, the tensile strength of the laser biomimetic samples is higher than that of the untreated samples. For the biomimetic samples with different carbon content, with an increase of carbon content, the tensile strength increases first and then decreases, while the plasticity of the biomimetic samples decreases continuously. The bionic samples have better wear resistance than that of the untreated samples. For bionic specimens with different carbon elements, wear resistance increases with an increase of carbon element content.