Influence of microalloying additions on Al-Mg alloy. Part 2: Phase analysis and sensitisation behaviour
- 10 April 2014
- journal article
- research article
- Published by SAGE Publications in Corrosion Engineering, Science and Technology: The International Journal of Corrosion Processes and Corrosion Control
- Vol. 49 (4) , 263-268
Abstract
A range of alloys based on the Al-4Mg-0·4Mn system were produced with selected quaternary microalloying additions. In Part 1 of this study, the electrochemical and corrosion response was studied. To characterise the sensitisation behaviour of these alloys, where sensitisation is the major mode of degradation of 5xxx alloys, heat treatment at 150°C was carried out and followed by the Nitric Acid Mass Loss Test (NAMLT) according to ASTM G67-04. Herein the alloying elements studied include silicon, zinc, titanium, zirconium and strontium. The results indicate that strontium (Sr), silicon (Si) and titanium (Ti) have a significant influence in reducing intergranular corrosion (IGC) susceptibility.Keywords
This publication has 30 references indexed in Scilit:
- Electrochemical behaviour of the β-phase intermetallic (Mg2Al3) as a function of pH as relevant to corrosion of aluminium–magnesium alloysCorrosion Science, 2013
- Imparting Sensitization Resistance to an Al-5Mg Alloy via Neodymium AdditionsCorrosion, 2012
- Intergranular Corrosion Penetration in an Al-Mg Alloy as a Function of Electrochemical and Metallurgical ConditionsCorrosion, 2012
- Precipitation behavior of the ß phase in Al-5083Materials Science and Engineering: A, 2010
- Effect of sensitization heat treatment on properties of Al–Mg alloy AA5083-H116Journal of Materials Science, 2008
- Role of intermetallic phases in localized corrosion of AA5083Electrochimica Acta, 2007
- Electrochemical Characteristics of Intermetallic Phases in Aluminum AlloysJournal of the Electrochemical Society, 2005
- Stress Corrosion Cracking of Sensitized AA5083 (Al-4.5Mg-1.0Mn)Materials Science Forum, 2002
- Role of Mg in the stress corrosion cracking of an Al-Mg alloyMetallurgical and Materials Transactions A, 2001
- Effect of Thermal Exposure on the Corrosion Properties of an Al-Mg-Sc Alloy SheetMaterials Science Forum, 2000