Characteristics Research of a High Sensitivity Piezoelectric MOSFET Acceleration Sensor
Open Access
Abstract
In order to improve the output sensitivity of the piezoelectric acceleration sensor, this paper proposed a high sensitivity acceleration sensor based on a piezoelectric metal oxide semiconductor field effect transistor (MOSFET). It is constituted by a piezoelectric beam and an N-channel depletion MOSFET. A silicon cantilever beam with Pt/ZnO/Pt/Ti multilayer structure is used as a piezoelectric beam. Based on the piezoelectric effect, the piezoelectric beam generates charges when it is subjected to acceleration. Due to the large input impedance of the MOSFET, the charge generated by the piezoelectric beam can be used as a gate control signal to achieve the purpose of converting the output charge of the piezoelectric beam into current. The test results show that when the external excitation acceleration increases from 0.2 g to 1.5 g with an increment of 0.1 g, the peak-to-peak value of the output voltage of the proposed sensors increases from 0.327 V to 2.774 V at a frequency of 1075 Hz. The voltage sensitivity of the piezoelectric beam is 0.85 V/g and that of the proposed acceleration sensor was 2.05 V/g, which is 2.41 times higher than the piezoelectric beam. The proposed sensor can effectively improve the voltage output sensitivity and can be used in the field of structural health monitoring.Keywords
Funding Information
- National Natural Science Foundation of China (61971180)
This publication has 41 references indexed in Scilit:
- A Resonant Z-Axis Aluminum Nitride Thin-Film Piezoelectric MEMS AccelerometerMicromachines, 2019
- Middle Ear Ossicular Chain Vibration Detection by Means of an Optimized MEMS Piezoelectric AccelerometerIEEE Sensors Journal, 2018
- A MEMS resonant accelerometer for low-frequency vibration detectionSensors and Actuators A: Physical, 2018
- Fabrication of ZnO nanorods and Chitosan@ZnO nanorods on MEMS piezoresistive self-actuating silicon microcantilever for humidity sensingSensors and Actuators B: Chemical, 2018
- Design, fabrication and calibration of a high-G MEMS accelerometerSensors and Actuators A: Physical, 2018
- A novel design methodology for the mixed-domain optimization of a MEMS accelerometerIntegration, 2018
- Design, fabrication and experiment of a MEMS piezoresistive high-g accelerometerJournal of Mechanical Science and Technology, 2013
- MEMS Accelerometer Based Nonspecific-User Hand Gesture RecognitionIEEE Sensors Journal, 2011
- A Monolithic CMOS-MEMS 3-Axis Accelerometer With a Low-Noise, Low-Power Dual-Chopper AmplifierIEEE Sensors Journal, 2008
- In-plane MEMS-based nano-g accelerometer with sub-wavelength optical resonant sensorSensors and Actuators A: Physical, 2008