24.6 An Instantaneously Broadband Ultra-Compact Highly Linear PA with Compensated Distributed-Balun Output Network Achieving >17.8dBm P1dB and >36.6% PAEP1dB over 24 to 40GHz and Continuously Supporting 64-/256-QAM 5G NR Signals over 24 to 42GHz
Authors:
- 1 February 2020
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 372-374
Abstract
5G communication promises 10x to 100x data-rate increase to radically change future wireless connectivity. Millimeter-wave (mm-wave) bands can potentially deliver extreme data rates and capacity compared to 10w-GHz bands. The 3GPP 5G NR standard specifies n257 band (26.50 to 29.50GHz), n258 band (24.25 to 27.50GHz), and n260 band (37.00 to 40.00GHz) for Frequency Range 2 (FR2) [1]. Different FR2 bands or their subsets are adopted by various countries/regions worldwide, which necessitates wideband/multiband mm-wave 5G systems to support international/cross-network roaming, particularly for user equipment (UE) devices [2], [3]. Common wideband power-amplifier (PA) architectures often suffer from various limitations [4]. Balanced PAs require wideband 90° hybrids that are often bulky and lossy for on-chip implementation. Staggered tuning sacrifices PA gain and output power $(\mathrm{P}_{\mathrm{out}})$ . High-order matching networks are popular for wideband PAs, but usually exhibit large form factor and poor passive efficiency in actual implementations [5], [6].
Keywords
This publication has 7 references indexed in Scilit:
- An $E$ -Band Power Amplifier With 26.3% PAE and 24-GHz Bandwidth in 22-nm FinFET CMOSIEEE Journal of Solid-State Circuits, 2019
- 4.8 A Highly Linear Super-Resolution Mixed-Signal Doherty Power Amplifier for High-Efficiency mm-Wave 5G Multi-Gb/s Communications2019
- A high-efficiency 28GHz outphasing PA with 23dBm output power using a triaxial balun combiner2018
- A Wideband Class-AB Power Amplifier With 29–57-GHz AM–PM Compensation in 0.9-V 28-nm Bulk CMOSIEEE Journal of Solid-State Circuits, 2017
- 2.7 A wideband 28GHz power amplifier supporting 8×100MHz carrier aggregation for 5G in 40nm CMOS2017
- 130-nm CMOS $K$-Band Two-Element Differential Power-Combining OscillatorsIEEE Transactions on Microwave Theory and Techniques, 2013
- Design Considerations for 60 GHz Transformer-Coupled CMOS Power AmplifiersIEEE Journal of Solid-State Circuits, 2009