Penetrability of microfine cement grouts: experimental investigation and fuzzy regression modeling
- 1 July 2015
- journal article
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 52 (7) , 868-882
Abstract
One-dimensional injection tests were conducted on sand columns with a height of 134 cm for the penetrability evaluation of microfine cement grouts. Three ordinary cement types were pulverized to obtain microfine cements having nominal maximum grain sizes of 20 and 10 μm, and these cements were used in the present investigation. Suspensions with water to cement (W/C) ratios of 1, 2, and 3, by weight, were injected into 13 clean sands with d15 ranging from 0.17 to 2.25 mm and Cu ranging from 1.19 to 6.67. Pulverization of the ordinary cements to produce microfine cements extends the range of groutable sands to “medium-to-fine”. Cement fineness; suspension W/C ratio and apparent viscosity; and sand grain size, gradation, and relative density are very important parameters, as they substantially affect both grout penetration and maximum injection pressure. The penetration length of cement grouts was correlated to parameters pertinent to the suspension, sand, and injection process by performing fuzzy and ordinary linear regression analyses of the injection test results. The resultant fuzzy regression models provided successful penetration length predictions for the majority of the cases analyzed, while the best ordinary regression model exhibited a correlation coefficient not higher than 0.363.Keywords
This publication has 35 references indexed in Scilit:
- Penetrability of hydraulic groutsMaterials and Structures, 2013
- An artificial neural network for groutability prediction of permeation grouting with microfine cement groutsComputers and Geotechnics, 2011
- Engineering Properties of Medium-to-Fine Sands Injected with Microfine Cement GroutMarine Georesources & Geotechnology, 2011
- Groutability of cement‐based grout with consideration of viscosity and filtration phenomenonInternational Journal for Numerical and Analytical Methods in Geomechanics, 2009
- Evaluation of elementary filtration properties of a cement grout injected in a sandCanadian Geotechnical Journal, 2006
- Variations in the rheology and penetrability of cement-based grouts—an experimental studyCement and Concrete Research, 2004
- Similarities and distances in fuzzy regression modelingSoft Computing, 2003
- Treatment of Medium- to Coarse-Grained Sands by Fine-Grained Portland Cement (FGPC) as an Alternative Grouting Material to Silicate-Ester GroutsCement, Concrete and Aggregates, 2003
- Real‐scale miscible grout injection experiment and performance of advection–dispersion–filtration modelInternational Journal for Numerical and Analytical Methods in Geomechanics, 2001
- Effect of Preparation Technique on Permeability and Strength of Cement-Grouted SandGeotechnical Testing Journal, 1994