Can a turbulent boundary layer become independent of the Reynolds number?
Authors:
- 18 July 2018
- journal article
- research article
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 851, 1-22
Abstract
This paper examines the Reynolds number ( $Re$ ) dependence of a zero-pressure-gradient (ZPG) turbulent boundary layer (TBL) which develops over a two-dimensional rough wall with a view to ascertaining whether this type of boundary layer can become independent of $Re$ . Measurements are made using hot-wire anemometry over a rough wall that consists of a periodic arrangement of cylindrical rods with a streamwise spacing of eight times the rod diameter. The present results, together with those obtained over a sand-grain roughness at high Reynolds number, indicate that a $Re$ -independent state can be achieved at a moderate $Re$ . However, it is also found that the mean velocity distributions over different roughness geometries do not collapse when normalised by appropriate velocity and length scales. This lack of collapse is attributed to the difference in the drag coefficient between these geometries. We also show that the collapse of the $U_{\unicode[STIX]{x1D70F}}$ -normalised mean velocity defect profiles may not necessarily reflect $Re$ -independence. A better indicator of the asymptotic state of $Re$ is the mean velocity defect profile normalised by the free-stream velocity and plotted as a function of $y/\unicode[STIX]{x1D6FF}$ , where $y$ is the vertical distance from the wall and $\unicode[STIX]{x1D6FF}$ is the boundary layer thickness. This is well supported by the measurements.
Keywords
This publication has 57 references indexed in Scilit:
- A new formulation for the streamwise turbulence intensity distribution in wall-bounded turbulent flowsEuropean Journal of Mechanics - B/Fluids, 2012
- A new scaling for the streamwise turbulence intensity in wall-bounded turbulent flows and what it tells us about the “outer” peakPhysics of Fluids, 2011
- Wall-bounded turbulent flows at high Reynolds numbers: Recent advances and key issuesPhysics of Fluids, 2010
- Rough wall skin friction measurements using a high resolution surface balanceInternational Journal of Heat and Fluid Flow, 2010
- Structure of the turbulent boundary layer over a rod-roughened wallInternational Journal of Heat and Fluid Flow, 2009
- Hot-wire spatial resolution issues in wall-bounded turbulenceJournal of Fluid Mechanics, 2009
- Criteria for assessing experiments in zero pressure gradient boundary layersFluid Dynamics Research, 2009
- Direct numerical simulation of the turbulent boundary layer over a rod-roughened wallJournal of Fluid Mechanics, 2007
- Scaling of the streamwise velocity component in turbulent pipe flowJournal of Fluid Mechanics, 2004
- Zero-Pressure-Gradient Turbulent Boundary LayerApplied Mechanics Reviews, 1997