LDLyazid Djenidi

Lyazid Djenidi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Lyazid Djenidi has a total of 45 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Dual scaling and the $2/3$ power law for the second-order scalar structure function in homogeneous turbulence with a mean scalar gradient

    by Shunlin Tang, R.A. Antonia, Lyazid Djenidi, Luminita Danaila

    A dual scaling of the second-order scalar structure function $\overline {{(\delta \theta )}^2}$ , i.e. a scaling based on the Batchelor–Kolmogorov scales $\theta _B$ , $\eta$ and another based on $\theta '$ , $L$ , representative of the large-scale motion, is examined in the context of the transport equation for $\overline {{(\delta \theta )}^2}$ . Direct numerical simulation data over a relatively wide range of the Taylor microscale Reynolds number $Re_\lambda$ and a Schmidt number of order 1 in statistically stationary homogeneous isotropic turbulence with a uniform mean scalar gradient are used. It is observed that as $Re_\lambda$ increases, a dual scaling appears to emerge, where the scaling based on $\theta '$ , $L$ extends to increasingly smaller values of $r/L$ , where $r$ is the separation associated with the increment $ {{\delta \theta }}$ , while the scaling based on $\theta _B$ , $\eta$ extends to increasingly larger values of $r/\eta$ . This suggests that both scalings should eventually overlap over a range of scales as $Re_\lambda$ continues to increase. Further, it is shown that such a dual scaling leads to the power-law relation $\overline {{(\delta \theta )}^2} \sim r^{\zeta _2}$ , where $\zeta _2=2/3$ in the overlap region. The use of an empirical model for the local slope of $\overline {{(\delta \theta )}^2}$ (i.e. $\zeta _2$ ) shows that a value of $Re_\lambda$ of order $10^4$ is required for the slope to first reach the value $2/3$ . Clearly, values larger than $10^4$ will be required before a $r^{2/3}$ inertial range is established.

  • Scaling of mixed velocity-temperature derivative skewness in stationary homogeneous isotropic turbulence with a uniform mean scalar gradient

    by S. L. Tang, L. Djenidi, R. A. Antonia

    Transport equations for the mean squared scalar derivatives in stationary homogeneous isotropic turbulence with a uniform mean scalar gradient are derived from the transport equations for the second-order scalar derivative tensor. After some manipulation of the equations, it is shown that the large-scale forcing caused by the mean scalar gradient can be recast in the form RiSθ*Peλθ−1 (Sθ* is the non-dimensional mean scalar gradient, Peλθ is the turbulent Péclet number, and Ri(i=1,2,3) are the normalized mixed velocity-scalar derivatives). The effect of the large-scale forcing gradually disappears as Peλθ becomes sufficiently large, implying a gradual approach toward a constant value of the mixed velocity-temperature derivative skewness with increasing Peλθ. The trend of available data for the dependence of this mixed skewness, both with respect to the Reynolds number for a fixed Sc and with respect to Sc for a fixed Reynolds number, is consistent with the analysis.


  • Reappraisal of plane wall jet self-similarity

    by L. Djenidi, Amit Agrawal

    There is a general consensus that the characteristic velocity and length scales for a plane wall jet exhibit power law with distance downstream of the jet nozzle/slot, x; however, no definitive values are given for the power-law exponents. In view of this, plane wall jet self-similarity is reappraised using a compilation of experimental and direct numerical data of plane wall jets. The plots of compensated distributions of the maximum velocity Umax and length y1/2, the location where the velocity is equal to Umax/2 in the outer part of the flow, reveal that these variables follow the power laws Umax∼y1/2n and y1/2∼xm, where n∼−1/2 and m∼1, which comply with self-similarity solutions. While n∼−1/2 is in agreement with the existing results, the linear growth of y1/2 contrasts with the common belief that m should be less than 1. It is argued that the limited ranges of x and Reynolds numbers (Re) used in the previous studies prevent this latter behavior to be observed. This behavior emerges when these data are compiled into a single set, allowing a reasonable range of x and Re. It is further observed that only one velocity scale, either Umax or uτ, the friction velocity, is needed for the outer region, which complies with a requirement imposed by self-similarity under a linear growth y1/2. In the inner region, either ν/uτ or y1/2,in (the location where the velocity is equal to Umax/2 in the inner part) can be used as a scaling velocity, while uτ should be the adequate scaling velocity. The present analysis provides some support to the argument that scaling could be universal, at least when the Reynolds number is large enough and the flow is allowed to evolve over a very long distance.


  • On predictive models for the equivalent sand grain roughness for wall-bounded turbulent flows

    by Misarah Abdelaziz, L. Djenidi, Mergen H. Ghayesh, Rey Chin

    One of the long-standing goals of rough wall fluid dynamics research is to determine the drag penalty of surfaces based solely on their topographical parameters. The most important length scale or roughness parameter that best describes a surface in relation to friction drag has not been agreed upon yet, despite the many studies that, over the years, have attempted to identify the most appropriate surface parameter. The concept of an equivalent sand-grain roughness (ks) was introduced to standardize different types of roughness in wall-bounded turbulence, serving as an input parameter for predicting the roughness function ΔU+. To anticipate ΔU+ generated by a rough surface under turbulent flow conditions, experts use roughness correlations that establish a correspondence between the topographical characteristics of the surface and ks. Therefore, a chronological compilation of roughness correlations is presented, detailing the parameter ranges and types of roughness used in their development. This study evaluates the effectiveness of predictive correlation functions and aims to formulate a universal function by exploring a comprehensive assortment of three-dimensional (3D) surface textures available in the literature. The results suggest that a correlation based on surface height skewness (ksk) and streamwise effective slope (ESx) can predict the ratio (ks/kq), where kq is the root mean square roughness height for 3D roughness in the fully rough regime. Despite the fact that the correlation is restricted to 3D surface roughness, which is a more realistic representation, the model demonstrated a high level of accuracy in predicting ks for over 120 distinct rough surfaces.


  • The ‘−1’ decay law for some small-scale quantities at large Péclet numbers and fixed Reynolds numbers

    by S.L. Tang, R.A. Antonia, L. Djenidi

    The effect of a uniform mean scalar gradient on the small scales of a passive scalar field in statistically stationary homogeneous isotropic turbulence is investigated through the transport equation for the scalar fluctuation. After some manipulation of the equation, it is shown that the effect can be recast in the form where Sc is the Schmidt number) as Buaria et al. (Phys. Rev. Lett., vol. 126, no. 3, 2021a, p. 034504) and complements the derivation by the latter authors, which is based on dimensional arguments and the introduction of a new diffusive length scale.


  • Dual scaling and the n-thirds law in grid turbulence

    by S.L. Tang, R.A. Antonia, L. Djenidi

    A dual scaling of the turbulent longitudinal velocity structure function $\overline {{(\delta u)}^n}$ , i.e. a scaling based on the Kolmogorov scales ( $u_K$ , $\eta$ ) and another based on ( $u'$ , $L$ ) representative of the large scale motion, is examined in the context of both the Kármán–Howarth equation and experimental grid turbulence data over a significant range of the Taylor microscale Reynolds number $Re_\lambda$ . As $Re_\lambda$ increases, the scaling based on ( $u'$ , $L$ ) extends to increasingly smaller values of $r/L$ while the scaling based on ( $u_K$ , $\eta$ ) extends to increasingly larger values of $r/\eta$ . The implication is that both scalings should eventually overlap in the so-called inertial range as $Re_\lambda$ continues to increase, thus leading to a power-law relation $\overline {{(\delta u)}^n} \sim r^{n/3}$ when the inertial range is rigorously established. The latter is likely to occur only when $Re_\lambda \to \infty$ . The use of an empirical model for $\overline {{(\delta u)}^n}$ , which complies with $\overline {{(\delta u)}^n} \sim r^{n/3}$ as $Re_\lambda \to \infty$ , shows that the finite Reynolds number effect may differ between even- and odd-orders of $\overline {{(\delta u)}^n}$ . This suggests that different values of $Re_\lambda$ may be required between even and odd values of $n$ for compliance with $\overline {{(\delta u)}^n} \sim r^{n/3}$ . The model describes adequately the dependence on $Re_\lambda$ of the available experimental data for $\overline {{(\delta u)}^n}$ and supports indirectly the extrapolation of these data to infinitely large $Re_\lambda$ .


  • Open Access

    Scaling of turbulent velocity structure functions: plausibility constraints

    by L. Djenidi, R.A. Antonia, S.L. Tang

    The $n$ th-order velocity structure function $S_n$ in homogeneous isotropic turbulence is usually represented by $S_n \sim r^{\zeta _n}$ , where the spatial separation $r$ lies within the inertial range. The first prediction for $\zeta _n$ (i.e. $\zeta _3=n/3$ ) was proposed by Kolmogorov (Dokl. Akad. Nauk SSSR, vol. 30, 1941) using a dimensional argument. Subsequently, starting with Kolmogorov (J. Fluid Mech., vol. 13, 1962, pp. 82–85), models for the intermittency of the turbulent energy dissipation have predicted values of $\zeta _n$ that, except for $n=3$ , differ from $n/3$ . In order to assess differences between predictions of $\zeta _n$ , we use the Hölder inequality to derive exact relations, denoted plausibility constraints. We first derive the constraint $(p_3-p_1)\zeta _{2p_2} = (p_3 -p_2)\zeta _{2p_1} +(p_2-p_1)\zeta _{2p_3}$ between the exponents $\zeta _{2p}$ , where $p_1 \leq p_2 \leq p_3$ are any three positive numbers. It is further shown that this relation leads to $\zeta _{2p} = p \zeta _2$ . It is also shown that the relation $\zeta _n=n/3$ , which complies with $\zeta _{2p} = p \zeta _2$ , can be derived from constraints imposed on $\zeta _n$ using the Cauchy–Schwarz inequality, a special case of the Hölder inequality. These results show that while the intermittency of $\epsilon$ , which is not ignored in the present analysis, is not incompatible with the plausible relation $\zeta _n=n/3$ , the prediction $\zeta _n=n/3 +\alpha _n$ is not plausible, unless $\alpha _n =0$ .


  • Flow characterization in the downhill region of a pulsed oblique round jet

    by Abhishek Mishra, Lyazid Djenidi, Amit Agrawal

    The present study aims at understanding the effect of external pulsations on the flow characteristics in the downhill region of an oblique jet impingement with the help of particle image velocimetry. The distance between nozzle exit and the wall is kept constant at L=4D (D is the diameter of the nozzle) and Re=1900 (based on nozzle diameter and the average jet exit velocity). The impingement angle is varied from θ=90∘ (normal impingement) to 30∘ and the Strouhal number (St=fD/U, where f is the external frequency and U is the average velocity) from 0 to 0.9. The wall jet corresponding to St=0.44 shows highest jet growth as compared to other jet pulsations. The wall jet at St=0.9 is observed to show similar behavior to that of the steady jet (St=0). A quadrant analysis shows that instability causes ejection motion to occur nearest to the impingement region when St=0.44. The ejection motion leads to an expansion of the wall jet region in the wall-normal direction which is also observed in the increase in jet half-width. Further, it is observed that the maximum wall jet velocity increases with decreasing θ. The location of the occurrence of the ejection motion depends strongly on θ, shifting downstream of the wall as θ decreases. A proper orthogonal decomposition analysis reveals that the dominant structures of the wall jet flow occur at the location where the ejection motion is initiated. A higher jet momentum is responsible for delay in the ejection motion and development of coherent structures in the case of a wall jet with lower impingement angles. These results provide some relatively important insights on the behavior of the wall jet under different pulsations in the case of oblique jet impingements which can be of practical interest for heat transfer studies as well as heat transfer applications involving jet impingement cooling and mixing.


  • Open Access

    Influence of skewed three-dimensional sinusoidal surface roughness on turbulent boundary layers

    by Misarah Abdelaziz, L. Djenidi, Mergen H. Ghayesh, Rey Chin

    The impact of roughness skewness (ksk) on turbulent boundary layer (TBL) flow with a zero pressure gradient over three-dimensional (3D) sinusoidal rough surfaces was experimentally investigated using a single hotwire anemometer. Nine 3D sinusoidal profiles were manufactured with positive, negative, and zero roughness skewness values. Measurements were taken at three different freestream velocities for each surface and compared with smooth wall TBL results. This study covered a range of friction Reynolds numbers (Reτ) from approximately 1000 to 4000, with δ/k≈20 ± 2, where δ represents the local boundary layer thickness, and k is the maximum height of the roughness, measured from the valley to peak. The results indicate that the wall-unit normalized streamwise mean velocity profiles for all rough surfaces exhibit a downward shift compared to the smooth wall profiles. Surfaces with positive roughness skewness produced the highest drag, leading to the largest downward shift. The friction coefficient (Cf) decreased as ksk decreased. The percentage increase in Cf and ΔU+ (the roughness function) was much larger when moving from negative to zero roughness skewness than when moving from zero to positive roughness skewness. The small differences in turbulence intensity profiles and higher-order turbulence statistics in the outer region of the TBL support the outer layer similarity hypothesis for the roughness considered in this study. The autocorrelation study revealed that surfaces with positive roughness skewness tend to shorten the average length of turbulence structures in the near-wall region.


  • Open Access

    On the effect of streamwise and spanwise spacing to height ratios of three-dimensional sinusoidal roughness on turbulent boundary layers

    by Misarah Abdelaziz, Lyazid Djenidi, Mergen H. Ghayesh, Rey Chin

    A developing zero pressure gradient (ZPG) turbulent boundary layer (TBL) over different three-dimensional (3-D) sinewave roughnesses is investigated experimentally using single hot-wire anemometry. Seven different sinewave profiles are fabricated with the same amplitude and with different wavelengths in the streamwise (sx) and spanwise (sz) directions. The effects of varying sx and sz on turbulence statistics and the drag coefficient (Cf) are assessed. The wall-unit normalised streamwise mean velocity profile is shifted downwards compared with the smooth wall profile for all roughnesses. The streamwise spacing to height ratio sx/k has a more significant effect on the roughness function ΔU+ and Cf compared with the spanwise spacing to height ratio sz/k. However, sz/k has a large impact on the streamwise turbulence intensities in the log and outer layer. An excellent collapse is observed among the mean streamwise velocity profiles plotted in defect form in the outer region. However, a lack of similarity between TBLs over different rough surfaces is observed in the outer region for the turbulenceintensities profiles. For isotropic 3-D sinusoidal roughness (equal streamwise and spanwise spacing to height ratios), the contours of premultiplied streamwise turbulent energy spectrograms show an increase of energy in the outer layer with increasing spacing to height ratios. For anisotropic 3-D sinusoidal roughness (unequal streamwise and spanwise spacing to height ratios), the contours of premultiplied streamwise turbulent energy spectrograms show an increase of energy in the outer layer with increasing sz/sx from half to two in this study.