Investigation and Optimization of Laser Welding of Ti-6Al-4 V Titanium Alloy Plates
- 18 November 2013
- journal article
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 135 (6) , 061012
Abstract
Titanium alloys are employed in a wide range of applications, from aerospace to medicine. In particular, Ti-6Al-4 V is the most common, thanks to an excellent combination of low density, high specific strength, and corrosion resistance. Laser welding has been increasingly considered as an alternative to traditional techniques to join titanium alloys. An increase in penetration depth and a reduction of possible welding defects are indeed achieved; moreover, a smaller grain size in the fused zone (FZ) is benefited in comparison to either tungsten inert gas (TIG) or plasma arc welding, thus improving the tensile strength of the welded structures. This study was carried out on 3 mm thick Ti-6Al-4 V plates in square butt welding configuration. The novelty element of the investigation is the use of a disk-laser source, which allows a number of benefits thanks to better beam quality; furthermore, a proper device was developed for bead protection, as titanium is prone to oxidation when in fused state. A three-level factorial plan was arranged in face-centered cubic scheme. The regression models were found for a number of crucial responses and the corresponding surfaces were discussed; then a numerical optimization was carried out. The suggested condition was evaluated to compare the actual responses to the predicted values; X-ray inspections, Vickers micro hardness tests, and tensile tests were performed for the optimum.Keywords
This publication has 13 references indexed in Scilit:
- Coupled Computational Fluid Dynamic and Finite Element Multiphase Modeling of Laser Weld Bead Geometry Formation and Joint StrengthsJournal of Manufacturing Science and Engineering, 2013
- A comparative study of pulsed Nd:YAG laser welding and TIG welding of thin Ti6Al4V titanium alloy plateMaterials Science and Engineering: A, 2013
- Investigation on the microstructure and mechanical properties of Ti–6Al–4V alloy joints with electron beam weldingMaterials & Design (1980-2015), 2012
- Microstructural characteristics and mechanical properties in laser beam welds of Ti6Al4V alloyJournal of Materials Science, 2011
- Weld-bead profile and costs optimisation of the CO2 dissimilar laser welding process of low carbon steel and austenitic steel AISI316Optics & Laser Technology, 2011
- Effect of welding speed on butt joint quality of Ti–6Al–4V alloy welded using a high-power Nd:YAG laserOptics and Lasers in Engineering, 2009
- Laser welding of Ti6Al4V titanium alloysJournal of Materials Processing Technology, 2009
- Ti6Al4V sheets lap and butt joints carried out by CO2 laser: mechanical and morphological characterizationJournal of Materials Processing Technology, 2004
- Laser Welding2003
- The effect of microstructures on the fatigue crack growth in Ti_6Al_4V laser weldsInternational Journal of Fatigue, 1997