Boru İçerisine Yerleştirilen Gözenekli Bir Kanatçığın Akışkan Akışı ve Sıcaklığına Etkisinin Sayısal Olarak İncelenmesi
- 1 June 2021
- journal article
- research article
- Published by Politeknik Dergisi in Journal of Polytechnic
- Vol. 24 (2) , 715-722
Abstract
En tr Energy is consumed continuously by people in their daily lives. People use energy in the devices, vehicles, etc. they demand efficient use of energy. Energy efficiency is important not only in the tools and equipment used by people, but also in all sectors where energy is produced and used. One of the equipment used for heating and cooling processes is heat exchangers. There are various types of heat exchangers used for different purposes. In this study, a double pipe heat exchanger is considered. It is aimed to increase the heat transfer with the fin added to the inner tube. In this study, the effect of a porous fin made for heating the air passing through the pipe on the flow and temperature of the combustion air was investigated. The effect of the height of the fin (h =3 mm, 5 mm, 7 mm), its porosity (= 0.1, 0.2, 0.3), and the laminar (Re = 100, 250, 500) and turbulent (Re = 25000, 45000, 60000) flow have been investigated. When the friction factor is examined, it decreases with the flow velocity and increases with the height of the fin. While the flow velocity and temperature difference decreases under laminar conditions, the height of the blade increases with the temperature difference in turbulent flows. İnsanlar günlük yaşantılarında sürekli olarak enerji tüketmektedirler. İnsanlar kullandıkları, cihazlarda, taşıtlarda vb. enerjinin verimli olarak kullanılmasını talep etmektedirler. Enerji verimliliği sadece insanların kullandığı araç ve gereçlerde değil enerjinin üretilip kullanıldığı tüm sektörlerde önemlidir. Isıtma ve soğutma işlemleri için kullanılan donanımlardan birisi de ısı değiştiricilerdir. Çeşitli tiplerde farklı amaçlar için kullanılan ısı değiştiriciler mevcuttur. Bu çalışmada eş eksenli çift borulu bir ısı değiştirici ele alınmıştır. İçteki boru içerisine eklenen kanatçık ile ısı transferinin artırılması amaçlanmıştır. Bu çalışmada, boru içinden geçen havanın ısıtılması için yapılan gözenekli bir kanatçığın yakma havasının akışına ve sıcaklığına olan etkisi incelenmiştir. Kanatçığın yüksekliğinin etkisi (h =3 mm, 5 mm, 7 mm), gözenekliliği ( = 0.1, 0.2, 0.3), akışın laminer (Re = 100, 250, 500) ve türbülanslı (Re = 25000, 45000, 60000) olma durumu incelenmiştir. Yapılan bu çalışmada elde edilen sonuçlar incelendiğinde, sürtünme faktörünün akış hızı ile azaldığı, kanatçık yüksekliğinin artışı ile arttığı görülmüştür. Laminer şartlarda akış hızının artışı ile sıcaklık farkı azalırken, türbülanslı akışlarda ise kanatçık yüksekliğinin artışı ile sıcaklık farkının arttığı belirlenmiştir.Keywords
This publication has 15 references indexed in Scilit:
- Thermal and fluid flow first-principles numerical design of an enhanced double pipe heat exchangerApplied Thermal Engineering, 2016
- Application of high porosity metal foams as air-cooled heat exchangers to high heat load removal systemsInternational Communications in Heat and Mass Transfer, 2009
- Analysis of fluid flow and heat transfer in a double pipe heat exchanger with porous structuresEnergy Conversion and Management, 2008
- The thermal modeling of a matrix heat exchanger using a porous medium and the thermal non-equilibrium modelInternational Journal of Thermal Sciences, 2008
- A synthesis of fluid and thermal transport models for metal foam heat exchangersInternational Journal of Heat and Mass Transfer, 2008
- Flow and heat transfer in a pipe with a fin attached to inner wallHeat and Mass Transfer, 2006
- An experimental and numerical study on heat transfer enhancement for gas heat exchangers fitted with porous mediaInternational Journal of Heat and Mass Transfer, 2004
- Metal foams as compact high performance heat exchangersMechanics of Materials, 2003
- Improving the performance of double-pipe heat exchangers by using porous substratesInternational Journal of Heat and Mass Transfer, 1999
- A new k-ϵ eddy viscosity model for high reynolds number turbulent flowsComputers & Fluids, 1995