Effect of vacuum brazing and rotary friction welding on microstructure and mechanical properties of laminated steel and nickel alloy joints
Open Access
- 29 March 2025
- journal article
- research article
- Published by Springer Nature in Welding in the World
- Vol. 69 (7) , 2123-2141
Abstract
In this study, a joint between a vacuum brazed laminated bimetal material, consisting of steel and Inconel $$\circledR $$ alloy, and a solid material is investigated. This type of joint is applied in an Axially Laminated Anisotropic Synchronous Reluctance Machine (ALASynRM) rotor, where the laminated active section of the rotor is joined to solid supporting shafts either by rotary friction welding (RFW) or vacuum brazing. The test specimens were manufactured with different RFW parameters and parent material compositions to evaluate the joint behavior. The RFW friction pressure (104–155 MPa) and time (1.0 $$-$$ 3.0 s) were varied to assess their impact on joint performance and composition, while other process parameters remained constant. The joint’s alloy composition and microstructure were analyzed, and its mechanical performance was assessed using tensile tests. Additionally, molecular dynamics (MD) simulations were employed to understand the nanoscale phenomena that occur during RFW joint formation. In this study, the ultimate tensile strength (UTS) of the joint in all RFW samples surpassed that of the vacuum brazed laminated material, while the vacuum brazed joints did not achieve comparable UTS. Metallurgical analysis indicated good and consistent diffusion between laminated bimetal and solid materials, resulting in defect-free joints. The MD simulations were strongly correlated with the experimental results, further validating our findings.
Keywords
Funding Information
- Research Council of Finland (346439)
This publication has 51 references indexed in Scilit:
- Structural analysis of aluminium-titanium-stainless steel three-layer composites produced by explosive weldingWelding in the World, 2024
- Effect of copper interlayer in dissimilar TA6V/AU4G rotary friction weld jointsWelding in the World, 2024
- Nanoscale phenomena during wetting of copper on nickel-based superalloy: A molecular dynamics studyComputational Materials Science, 2023
- Effects of nickel layer on interfacial micro-structure distribution and macro-mechanical properties for vacuum-brazed dissimilar steel jointsWelding in the World, 2023
- A Review on Rotary and Linear Friction Welding of Inconel AlloysTransactions of the Indian Institute of Metals, 2021
- Simulations of primary damage in a High Entropy Alloy: Probing enhanced radiation resistanceActa Materialia, 2021
- A brief review on welding of stainless steel clad plates: issues and future perspectivesThe International Journal of Advanced Manufacturing Technology, 2021
- Specific features of defect and mass transport in concentrated fcc alloysActa Materialia, 2016
- Introduction2015
- Fatigue behaviour of AISI 304 steel to AISI 4340 steel welded by friction weldingJournal of Materials Science, 2006