Experimental characterization of the hygrothermal ageing effects on the bulk mechanical properties and lap-shear strength of the novel bio-based epichlorohydrin/cardanol adhesive
- 10 September 2020
- journal article
- research article
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 98 (1) , 49-67
Abstract
In the present paper, the effects of hygrothermal ageing on the bulk mechanical properties and lap-shear strength of the novel bio-based epichlorohydrin/cardanol adhesive have been studied by tension tests, fracture toughness tests and single-lap shear tests on bonded CFRP and aluminum specimens. The thermomechanical properties of the adhesive have been characterized using dynamic mechanical analysis tests. Ageing of the specimens has been realized inside an environmental chamber under the conditions of 70°C/85%RH until saturation. The glass transition temperature of the adhesive is reduced by 13.8%. The results from the tension tests reveal that ageing has caused a reduction of Young’s modulus by 13.4% and of tensile strength by 34.9%. Fracture toughness is reduced by 3.2% while the plasticity caused by the ageing has led to a less brittle behavior. Contrary to the bulk mechanical properties, the lap-shear strength of both the CFRP and aluminum joints is not affected. These findings reveal that although Tg and tensile properties of the bio-adhesive are significantly reduced by the ageing, the fracture toughness and lap-shear strength, which largely determine the adhesion capacity of the adhesive, are not affected.Keywords
This publication has 31 references indexed in Scilit:
- A Review on Petroleum: Source, Uses, Processing, Products and the EnvironmentJournal of Applied Sciences, 2011
- Strength and Durability of Epoxy-Aluminum JointsThe Journal of Adhesion, 2010
- Depletion and the Future Availability of Petroleum ResourcesThe Energy Journal, 2009
- Environmental analysis of plastic production processes: Comparing petroleum-based polypropylene and polyethylene with biologically-based poly-β-hydroxybutyric acid using life cycle analysisJournal of Biotechnology, 2007
- DMTA based investigation of hygrothermal ageing of an epoxy system used in rehabilitationJournal of Applied Polymer Science, 2007
- Effect of hygrothermal aging history on sorption process, swelling, and glass transition temperature in a particle‐filled epoxy‐based adhesiveJournal of Applied Polymer Science, 2002
- The Fatigue and Durability Behaviour of Automotive Adhesives. Part II: Failure MechanismsThe Journal of Adhesion, 1998
- Price discovery in petroleum markets: Arbitrage, cointegration, and the time interval of analysisJournal of Futures Markets, 1994
- Water absorption by an epoxy resin and its effect on the mechanical properties and infra-red spectraPolymer, 1993
- Strength Loss Mechanisms for Adhesive Bonds to Electroplated Zinc and Cold Rolled Steel Substrates Subjected to Moist EnvironmentsThe Journal of Adhesion, 1989