A robot in-place geometric model reconstruction method for additive manufacturing parts by fusing 3D scanner measuring data
- 15 January 2025
- journal article
- research article
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 36 (2) , 025016
Abstract
Geometric model reconstruction of additive manufacturing (AM) parts based on in-place measurement (IPM) is meaningful in realizing the robotic post-processing of AM parts. However, the low motion accuracy of the robot and the low efficiency of the IPM system restrict the development of the in-place model reconstruction. This paper presents a reconstruction method that integrates the 3D scanner and the robotic IPM system to improve the accuracy and efficiency of the model reconstruction. First, considering the measurement errors in the robotic IPM system, an error correction model is developed by measuring the calibration ball (CB) at the boundary of the measurement space. For each CB, a modified correction matrix (MCM) is constructed based on measurement data and geometric parameters of the CB to compensate for measurement errors. Second, a CB in the measurement space is measured, and the MCMs of each CB at the boundary are combined using the neural network model. Based on the measurement data of the CB, a geometric error correction model for the entire measurement space is developed, which corrects the spatial distribution of geometric errors in the robotic IPM system and enhances its accuracy within the measurement space. Finally, a local motion algorithm based on IPM data is proposed to calibrate the large volume of point cloud data from a 3D scanner. A high-precision model of AM parts is quickly reconstructed by fusing the few high-accuracy robotic IPM data with the large volume of low-accuracy point cloud data obtained by the 3D scanner. In order to verify the effectiveness of the method proposed in this paper, the measurement experiments on the CB are conducted. The results show that the model reconstruction accuracy can reach 0.06 mm compared with point cloud data obtained by the 3D scanner. The AM concave and convex parts are measured and the manufacturing geometric accuracy is analyzed by the proposed method. Compared to the digital model, the maximum deviation of the AM concave part is 1.3864 mm, and the maximum deviation of the AM convex part is 1.6802 mm.Keywords
Funding Information
- Natural Science Research Project of Jiangsu Province (22KJB460034)
- Postdoctoral Science Foundation of China (2023M730348)
This publication has 28 references indexed in Scilit:
- Bead geometry prediction and optimization for corner structures in directed energy deposition using machine learningAdditive Manufacturing, 2024
- Contact on-machine measurement probe error correction method for optical aspheric surface ultraprecision machiningMeasurement, 2023
- Mountain Gazelle Optimizer: A new Nature-inspired Metaheuristic Algorithm for Global Optimization ProblemsAdvances in Engineering Software, 2022
- Correction of the measuring system composed of the contact probe head mounted on the industrial robotMeasurement, 2022
- High-order joint-smooth trajectory planning method considering tool-orientation constraints and singularity avoidance for robot surface machiningJournal of Manufacturing Processes, 2022
- Precision measurement and compensation of kinematic errors for industrial robots using artifact and machine learningAdvances in Manufacturing, 2022
- LASSO based compensation method for geometric errors of large coordinate measuring machineMeasurement, 2022
- Multisensor data processing in dimensional metrology for collaborative measurement of a laser plane sensor combined to a touch probeMeasurement, 2022
- The Kinematic Calibration of a Drilling Robot with Optimal Measurement Configurations Based on an Improved Multi-objective PSO AlgorithmInternational Journal of Precision Engineering and Manufacturing, 2021
- Accurate compensation method for probe pre-travel errors in on-machine inspectionsThe International Journal of Advanced Manufacturing Technology, 2019