Electrochemical Metallic Ion Migration Property of Multi-Layer Ceramic Capacitor for Car Electronics
Open Access
- 31 December 2023
- journal article
- research article
- Published by The Korean Welding and Joining Society in Journal of Welding and Joining
- Vol. 41 (6) , 519-527
Abstract
As the use of electrical components in automobiles increases, the occurrence of electorchemical metallic ion migration (ECM), which is one of the causes of various failures in electrical components, is also increasing. Therefore, in this study, 1608 MLCC chip components were used for temperature-humidity-bias (THB) tests at 65℃/85%R.H., 65℃/95%R.H., and 85℃/85%R.H. Three types of THB tests were conducted for 2,934 h. For the THB test, voltages of 3.3, 12 and 24 V were applied, and real-time resistance of MLCCs were measured at every 40 mms intervals. During the ECM test, the ECM occurrence time was measured by monitoring the insulation resistance of between the electrode of MLCC under each THB test conditions. The failure criteria for ECM occurrence were 106 Ω or less, and the time when it occurred more than twice was judged as the ECM failure criteria. Based on the ECM occurrence time, the mean life time of ECM occurrence according to temperature, humidity and applied voltage conditions was derived through Weibull statistical analysis. Finally, we compared and analyzed the sensitivity of MLCC components to ECM generation under use environment of automotive electronics.Keywords
Funding Information
- Hyundai Mobis
This publication has 9 references indexed in Scilit:
- Solder Joint Degradation and Electrochemical Metallic Ion Migration Property of Solder Joints with Surface FinishJournal of Welding and Joining, 2023
- Intermetallic Compound Growth Induced by Electromigration in Sn-2.5Ag Solder Joints with ENEPIG Surface FinishJournal of Welding and Joining, 2022
- Lifetime Prediction of Electrochemical Ion Migration with Various Surface Finishes of Printed Circuit BoardsJournal of Electronic Materials, 2019
- Degradation Behavior of Solder Joint and Implementation Technology for Lead-free Automotive ElectronicsJournal of Welding and Joining, 2013
- Effects of PCB Surface Finishes on Mechanical Reliability of Sn-1.2Ag-0.7Cu-0.4In Pb-free Solder JointJournal of the Microelectronics and Packaging Society, 2012
- Flux residue effect on the electrochemical migration of Sn-3.0Ag-0.5CuJournal of Welding and Joining, 2011
- Reliability of Printed Circuit Boards Processed Using No-Clean Flux Technology in Temperature–Humidity–Bias ConditionsIEEE Transactions on Device and Materials Reliability, 2008
- Surface Insulation Resistance of Conformally Coated Printed Circuit Boards Processed With No-Clean FluxIEEE Transactions on Electronics Packaging Manufacturing, 2006
- A Study on the Metallic Ion Migration Phenomena of PCBKorean Journal of Materials Research, 2005