CALIBRATION AND EXPERIMENTS OF THE SIMULATION BONDING PARAMETERS FOR PLUG SEEDLING SUBSTRATE BLOCK
Authors:
- 30 April 2023
- journal article
- research article
- Published by INMA Bucharest-Romania in INMATEH Agricultural Engineering
- Vol. 69 (1) , 617-625
Abstract
To accurately simulate the interactions between the plug seedlings and the planter during the planting process and explore the damage mechanism of the plug seedling substrate block, the bonding parameters of plug seedlings substrate block were calibrated by the discrete element method. The physical puncture test showed that the average of maximum force of the cone indenter on substrate block measured by texture analyzer was 4.633 N. A Hertz-Mindlin with the bonding model was established for the substrate block in EDEM software. A virtual calibration experiment was designed with the puncture force of substrate block as the evaluation index. The two-level factorial test and the steepest climbing test were used to screen out the significant parameters and the optimal interval. Then, the Box-Behnken test and the optimization solution were used to obtain the optimal bonding parameter combination of the substrate block particles. Finally, the optimal parameter combination was simulated and verified. The relative error of the maximum puncture force between the simulated value and the measured value was 1.88 %, which indicated that the bonding parameters of the substrate block obtained by calibration were accurate and reliable.Keywords
This publication has 18 references indexed in Scilit:
- PARAMETER OPTIMIZATION AND EXPERIMENT OF SLIDER-HOLE-WHEEL SEED-METERING DEVICE BASED ON DISCRETE ELEMENT METHODINMATEH Agricultural Engineering, 2021
- Design of and Experiment with Seedling Selection System for Automatic Transplanter for Vegetable Plug SeedlingsAgronomy, 2021
- DESIGN AND EXPERIMENT OF TRANSPLANTING MACHINE FOR CABBAGE SUBSTRATE BLOCK SEEDLINGSINMATEH Agricultural Engineering, 2021
- Optimization of Main Link Lengths of Transplanting Device of Semi-Automatic Vegetable TransplanterAgronomy, 2020
- Design and Tests of a Multi-pin Flexible Seedling Pick-up Gripper for Automatic TransplantingApplied Engineering in Agriculture, 2019
- Calibration of discrete element model parameters: soybeansComputational Particle Mechanics, 2018
- Modeling breakage and motion of black pepper seeds in cryogenic millAdvanced Powder Technology, 2018
- Assessment of Tomato Seedling Substrate-Root Quality Using X-Ray Computed Tomography and Scanning Electron MicroscopyApplied Engineering in Agriculture, 2016
- A discrete element model and its experimental validation for the prediction of draft forces in cohesive soilJournal of Terramechanics, 2014
- Development of a walk-behind type hand tractor powered vegetable transplanter for paper pot seedlingsBiosystems Engineering, 2011