Investigation on mechanical and thermal behaviour of graphene bonded carbon/Kevlar hybrid fabric polymer composites
Open Access
- 11 May 2024
- journal article
- research article
- Published by Springer Nature in Journal of Engineering and Applied Science
- Vol. 71 (1) , 1-10
Abstract
The present research is aimed to understand the influence of graphene-reinforced carbon/Kevlar hybrid fabric epoxy composites. Samples HG0, HG2, HG4, and HG6 are fabricated using four layers of fabric mat and with varying graphene weight percentage as 0, 2, 4, and 6 wt.%, respectively. Mechanical characterizations such as hardness, tensile, and flexural strength were individually assessed. Thermal stability is evaluated through thermos-gravimetric analysis. Composite HG6 with high filler loading showed 71% and 114.4% greater tensile and flexural strength compared to unfilled HG0 specimen. Similarly, HG6 exhibited greater thermal stability. Inclusion of graphene particles in higher concentration improved the interfacial bonding between fibre/matrix/filler system. Fracture surfaces are analysed using scanning electron microscopy to understand the failure mechanisms.Keywords
This publication has 33 references indexed in Scilit:
- Mechanical and thermal properties of flax/carbon/kevlar based epoxy hybrid compositesPolymer Composites, 2022
- A review of recent progress in improving the fracture toughness of epoxy‐based composites using carbonaceous nanofillersPolymer Composites, 2022
- Polymer composite materials: A comprehensive reviewComposite Structures, 2021
- Synergistic effect of nano graphene on the mechanical behaviour of glass-epoxy polymer compositesMaterials Today: Proceedings, 2020
- Improved interfacial property of carbon fiber composites with carbon nanotube and graphene oxide as multi-scale synergetic reinforcementsComposites Part A: Applied Science and Manufacturing, 2019
- Investigation on effect of chemical composition of bio-fillers on filler/matrix interaction and properties of particle reinforced composites using FTIRComposites Part B: Engineering, 2019
- Mechanical properties and adhesive behavior of epoxy-graphene nanocompositesInternational Journal of Adhesion and Adhesives, 2018
- Effect of defects on thermal conductivity of graphene/epoxy nanocompositesCarbon, 2018
- Fracture related mechanical properties of low and high graphene reinforcement of epoxy nanocompositesComposites Science and Technology, 2017
- Effect of sizing on carbon fiber surface properties and fibers/epoxy interfacial adhesionApplied Surface Science, 2011