Estimation of the manipulated payload mass in off-highway machines is made non-trivial by the nonlinearities associated with the hydraulic systems used to actuate the linkage of the machine in addition to the nonlinearity of the kinematics of the linkage itself. Hydraulic cylinder friction, hydraulic conduit compressibility, linkage machining variation and linkage joint friction all make this a complex task under even ideal (machine static) conditions. This problem is made even more difficult when the linkage is mobile as is often the case with off-highway equipment such as four-wheel-drive loaders, cranes, and excavators. The rigid body motion of this type of equipment affects the gravitational loads seen in the linkage and impacts the payload estimate. The commercially available state-of-the-art load estimation solutions rely on the mobile machine becoming pseudo-static in order to maintain accuracy. This requirement increases the time required to move the material and decreases the productivity of the machine. An artificial neural network solution to this problem that enables the machine to remain dynamic and still accurately estimate the payload is discussed in this paper. Development and implementation on an actual four-wheel-drive loader is shown.