Preliminary modelling of power losses in roller chain drive: application to single speed cycling
Open Access
- 18 November 2022
- journal article
- research article
- Published by EDP Sciences in Mechanics & Industry
- Vol. 23, 27
Abstract
A quasi-static chain drive model is proposed. This model, consistent with single speed cycling application, applies to simple two sprocket drives. The kinematics of the transmission is determined, including the capture and release positions of the rollers and the influence of the polygonal effect. The tensions into the links and the contact forces (between rollers and sprocket) are then calculated based on the results of the kinematic analysis. Both chain strands are assumed to be straight and their tension are considered as imposed. An estimate of the roller displacement is proposed using existing studies on the relationship between loading conditions and roller positions along the sprocket tooth profile. The presented model, is then used to assess the contribution of both meshing and roller motion on the global efficiency of the drive. Calculations show that the magnitude of both loss sources is similar for a wide range of gear ratios and loading conditions. According to the presented results, the relative motion between the rollers and the sprocket tooth profile should be considered in future studies dedicated to chain drive efficiency.Keywords
This publication has 25 references indexed in Scilit:
- A method of measuring the dynamic loads in high-speed timing chainsProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2000
- The effects of the pitch difference on the load distribution of a roller chain driveMechanism and Machine Theory, 1989
- Theoretical Efficiency of a Cranked Link Chain DriveProceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science, 1986
- Forces in a Heavy-Duty Drive Chain during ArticulationProceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science, 1986
- Experimental Determination of the Roller Chain Load DistributionJournal of Mechanical Design, 1983
- Analysis of sprocket load distributionMechanism and Machine Theory, 1983
- Vibration of a Roller Chain Drive Operating at Constant Speed and LoadProceedings of the Institution of Mechanical Engineers, 1980
- The Influence of Lubrication on Tooth-Roller Impacts in Chain DrivesProceedings of the Institution of Mechanical Engineers, 1977
- Transverse vibrations of power transmission chainsBritish Journal of Applied Physics, 1957
- Transverse oscillations in travelling stringsBritish Journal of Applied Physics, 1954