Characteristics of TiN film deposited on stellite using reactive magnetron sputter ion plating
Authors:
- 1 September 1997
- journal article
- Published by Springer Nature in Journal of Materials Research
- Vol. 12 (9) , 2393-2400
Abstract
TiN films were deposited onto stellite 6B alloy (Co base) by the reactive magnetron sputter ion plating. As the substrate bias increases, TiN film changes from columnar structure to dense structure with great hardness and smooth surface due to densification and resputtering by ion bombardment. The content of oxygen and carbon impurities in the TiN film decreases greatly when the substrate bias is applied. The preferred orientation of the TiN films changes from (200) to (111) with decreasing N2/Ar ratio and from (200) to (111) and then (220) with increasing the substrate bias. The change of the preferred orientation is discussed in terms of surface energy and strain energy which are related to the impurity contents and the ion bombardment damage. The hardness of the TiN film increases with increasing compressive stress generated in the film by virtue of ion bombardment. It becomes as high as up to 3500 kgf/mm2 when an appropriate substrate bias is applied.Keywords
This publication has 18 references indexed in Scilit:
- Effects of strain energy on the preferred orientation of TiN thin filmsJournal of Applied Physics, 1993
- X-ray diffraction studies of physically vapour-deposited coatingsSurface and Coatings Technology, 1989
- Structure, properties and applications of TiN coatings produced by sputter ion platingVacuum, 1988
- Friction and wear properties of hard carbon films formed on cemented carbides by D.C. plasma chemical vapour depositionSurface and Coatings Technology, 1988
- Correlation of process and system parameters with structure and properties of physically vapour- deposited hard coatingsThin Solid Films, 1988
- Hafnium nitride coatings prepared by very high rate reactive sputteringThin Solid Films, 1984
- Mechanisms of reactive sputtering of titanium nitride and titanium carbide II: Morphology and structureThin Solid Films, 1983
- Adhesion and hardness of ion-plated TiC and TiN coatingsThin Solid Films, 1983
- The effects of substrate bias on the structural and electrical properties of TiN films prepared by reactive r.f. sputteringThin Solid Films, 1980
- Elements of X-Ray DiffractionAmerican Journal of Physics, 1957