Simultaneous Phosphate Removal and Power Generation by the Aluminum–Air Fuel Cell for Energy Self-Sufficient Electrocoagulation
Open Access
- 6 April 2023
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 13 (7) , 4628
Abstract
A self-powered electrocoagulation system with a single-chamber aluminum–air fuel cell was employed for phosphate removal in this study. Electricity production and aluminum hydroxides in solution were also investigated. When the NaCl concentration increased from 2 mmol/L to 10 mmol/L, the phosphate removal increased from 86.9% to 97.8% in 60 min. An electrolyte composed of 10 mmol/L of NaCl was shown to obtain a maximum power density generation of 265.7 mW/m2. When the initial solution pH ranged from 5.0 to 9.0, 98.5% phosphate removal and a maximum power density of 338.1 mW/m2 were obtained at pH 6.0. Phosphate was mainly removed by aluminum hydroxide adsorption. These results demonstrate that the aluminum–air fuel cell can be applied as electricity-producing electrocoagulation equipment. Aluminum–air fuel cells provide an alternative method to meet the goal of carbon neutrality in wastewater treatment compared with traditional energy-consuming electrocoagulation systems.Keywords
Funding Information
- National Natural Science Foundation of China (52204184, N2201019)
- Fundamental Research Funds for the Central Universities (52204184, N2201019)
This publication has 47 references indexed in Scilit:
- Removal of phosphate from landscape water using an electrocoagulation process powered directly by photovoltaic solar modulesSolar Energy Materials and Solar Cells, 2013
- A novel structure of scalable air-cathode without Nafion and Pt by rolling activated carbon and PTFE as catalyst layer in microbial fuel cellsWater Research, 2012
- Characterization of flocs generated by preformed and in situ formed Al13 polymerChemical Engineering Journal, 2012
- Anodic Dissolution of Pure Aluminum during Electrocoagulation Process: Influence of Supporting Electrolyte, Initial pH, and Current DensityIndustrial & Engineering Chemistry Research, 2011
- Electrochemical phosphates removal using iron and aluminium electrodesChemical Engineering Journal, 2011
- Electrochemical technologies for the regeneration of urban wastewatersElectrochimica Acta, 2010
- Modelling of anodic dissolution of pure aluminium in sodium chlorideElectrochimica Acta, 2009
- Orthophosphate and metaphosphate ion removal from aqueous solution using alum and aluminum hydroxideJournal of Colloid and Interface Science, 2007
- The effects of current density and phosphate concentration on phosphate removal from wastewater by electrocoagulation using aluminum and iron plate electrodesSeparation and Purification Technology, 2006
- Decolorization of Reactive Dye Solutions by Electrocoagulation Using Aluminum ElectrodesIndustrial & Engineering Chemistry Research, 2003