Hanlin Qi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Hanlin Qi has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Xiaoyu Han
Department of Environmental Engineering, School of Resources and Civil Engineering, Northeastern University, Shenyang 110819, China
1 shared publication - Xin Zhao
School of Resources and Civil Engineering, Northeastern University, Shenyang 110819, China
1 shared publication - Youpeng Qu
School of Life Science and Technology, Harbin Institute of Technology, No. 2 Yikuang Street, Nangang District, Harbin 150080, China
1 shared publication - Yujie Feng
State Key Laboratory of Urban-rural Water Resource and Environment, School of Environment, Harbin Institute of Technology, Harbin 150090, China
1 shared publication
Latest Publications
- Open Access
- 6 April 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (7) , 4628
Simultaneous Phosphate Removal and Power Generation by the Aluminum–Air Fuel Cell for Energy Self-Sufficient Electrocoagulation
A self-powered electrocoagulation system with a single-chamber aluminum–air fuel cell was employed for phosphate removal in this study. Electricity production and aluminum hydroxides in solution were also investigated. When the NaCl concentration increased from 2 mmol/L to 10 mmol/L, the phosphate removal increased from 86.9% to 97.8% in 60 min. An electrolyte composed of 10 mmol/L of NaCl was shown to obtain a maximum power density generation of 265.7 mW/m2. When the initial solution pH ranged from 5.0 to 9.0, 98.5% phosphate removal and a maximum power density of 338.1 mW/m2 were obtained at pH 6.0. Phosphate was mainly removed by aluminum hydroxide adsorption. These results demonstrate that the aluminum–air fuel cell can be applied as electricity-producing electrocoagulation equipment. Aluminum–air fuel cells provide an alternative method to meet the goal of carbon neutrality in wastewater treatment compared with traditional energy-consuming electrocoagulation systems.
- 6 April 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (7) , 4628
Open AccessSimultaneous Phosphate Removal and Power Generation by the Aluminum–Air Fuel Cell for Energy Self-Sufficient Electrocoagulation
A self-powered electrocoagulation system with a single-chamber aluminum–air fuel cell was employed for phosphate removal in this study. Electricity production and aluminum hydroxides in solution were also investigated. When the NaCl concentration increased from 2 mmol/L to 10 mmol/L, the phosphate removal increased from 86.9% to 97.8% in 60 min. An electrolyte composed of 10 mmol/L of NaCl was shown to obtain a maximum power density generation of 265.7 mW/m2. When the initial solution pH ranged from 5.0 to 9.0, 98.5% phosphate removal and a maximum power density of 338.1 mW/m2 were obtained at pH 6.0. Phosphate was mainly removed by aluminum hydroxide adsorption. These results demonstrate that the aluminum–air fuel cell can be applied as electricity-producing electrocoagulation equipment. Aluminum–air fuel cells provide an alternative method to meet the goal of carbon neutrality in wastewater treatment compared with traditional energy-consuming electrocoagulation systems.