Chalcogenide glass e-beam and photoresists for ultrathin grayscale patterning
- 1 October 2009
- journal article
- Published by SPIE-Intl Soc Optical Eng in Journal of Micro/Nanolithography, MEMS, and MOEMS
- Vol. 8 (4) , 043012-043012-11
Abstract
The advantages and applications of chalcogenide glass (ChG) thin film photoresists for grayscale lithography are demonstrated. It is shown that the ChG films can be used to make ultrathin , high-resolution grayscale patterns, which can find their application, for example, in IR optics. Unlike polymer photoresists, the IR transparent ChG patterns can be useful as such on the surface or can be used to transfer the etched pattern into silicon or other substrates. Even if the ChG is used as an etch mask for the silicon substrate, its greater hardness can achieve a greater etch selectivity than that obtained with organic photoresists. The suitability of ChG photoresists is demonstrated with inexpensive and reliable fabrication of ultrathin Fresnel lenses that are transparent in the visible as well as in the IR region. The optical functionality of the Fresnel lenses is confirmed. Application of silver photodissolution in grayscale lithography for microelectromechanical systems (MEMS) applications is also shown. A substrate to ChG/silver thickness etching ratio of is obtained for the transfer of patterns into silicon using reactive ion etching (RIE), more than a fivefold increase compared to traditional polymer photoresist.
Keywords
This publication has 41 references indexed in Scilit:
- Chalcogenide glassy photoresists: History of development, properties, and applicationsPhysica Status Solidi (b), 2009
- Dry-etch of As2S3 thin films for optical waveguide fabricationJournal of Vacuum Science & Technology A, 2005
- In situ analysis of thioarsenite complexes in neutral to alkaline arsenic sulphide solutionsMineralogical Magazine, 2005
- Development of a Deep Silicon Phase Fresnel Lens Using Gray-Scale Lithography and Deep Reactive Ion EtchingJournal of Microelectromechanical Systems, 2004
- Investigation of gray-scale technology for large area 3D silicon MEMS structuresJournal of Micromechanics and Microengineering, 2002
- Continuous profile writing by electron and optical lithographyMicroelectronic Engineering, 1997
- Low-energy focused-ion-beam exposure characteristics of an amorphous Se75Ge25 resistJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1997
- Positive and negative etching of As-S thin layers†International Journal of Electronics, 1994
- Photostructural transformations in amorphous chalcogenide semiconductorsPhysica Status Solidi (b), 1994
- Plasma-processed positive and negative resist behavior of obliquely deposited amorphous P–Se filmsJournal of Vacuum Science & Technology B, 1985