Experimental and numerical characterization of the interface between concrete masonry block and mortar
Open Access
- 1 June 2020
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Revista IBRACON de Estruturas e Materiais
- Vol. 13 (3) , 578-592
Abstract
Masonry is a construction system that has been used since the beginning of civilization and is still used throughout the world. The finite element method is a recent development that allows complex problems, including structural masonry problems, to be solved. A vast amount of literature exists on finite element modeling, using software such as ABAQUS, to represent experimental masonry models. Based on this established pattern, an experimental and analytical research program was designed and implemented. Thus, a set of tests was conducted to determine the compressive and tensile strengths of the masonry components, i.e., block, mortar, and grout. Bond wrench tests, diagonal tension tests, and horizontal joint shear tests were conducted to characterize the interface between the blocks and the mortar. A finite element model was then developed to represent the physical models and the general conclusion is that the finite element model was able to represent reasonably well the physical models.Keywords
This publication has 19 references indexed in Scilit:
- Experimental study of CFRP-confined reinforced concrete masonry columns tested under concentric and eccentric loadingComposites Part B: Engineering, 2018
- Experimental study on scale effects in clay brick masonry prisms and wall panels investigating compression and shear related propertiesConstruction and Building Materials, 2018
- Simulating masonry wall behaviour using a simplified micro-model approachEngineering Structures, 2017
- Parameter estimation for nonlinear analysis of multi-perforated concrete masonry wallsConstruction and Building Materials, 2017
- Assessment of the properties to characterise the interface between clay brick substrate and strengthening mortarConstruction and Building Materials, 2016
- Bond-strength performance of hydraulic lime and natural cement mortared sandstone masonryConstruction and Building Materials, 2015
- Simplified micro modeling of partially grouted masonry assemblagesConstruction and Building Materials, 2015
- Seismic Performance Quantification of Reinforced Masonry Structural Walls with Boundary ElementsJournal of Structural Engineering, 2014
- Experimental investigations of the joint-mortar behaviourMechanics Research Communications, 2006
- New Test for Determination of Masonry Tensile Bond StrengthJournal of Materials in Civil Engineering, 2005