Instability of steel gusset plates in compression
Authors:
- 7 March 2013
- journal article
- research article
- Published by Taylor & Francis in Structure and Infrastructure Engineering
- Vol. 10 (8) , 1038-1048
Abstract
As a result of the structural failure of the I-35W Bridge in Minneapolis in 2007, the Federal Highway Administration (FHWA) issued guidelines for the load rating of gusset plates and recommended that the capacity of these plates on non-redundant steel truss bridges be verified. The purpose of this study is to examine the buckling behaviour of steel gusset plates in greater detail, accounting for parameters that were not explicitly included in the guidelines, such as initial deformations of the gusset plate, stiffness of the framing members, load distribution from the framing members to the plate and load eccentricity. For this purpose, a finite-element model of a gusset plate was developed and verified against experimental measurements. Results show that, for in-plane compressive loads with no moment and no eccentricity, the FHWA guidelines for load rating are conservative and safe for initial out-of-plane deformations up to one plate thickness.Keywords
This publication has 5 references indexed in Scilit:
- Finite element analysis and experimental study on high strength bolted friction grip connections in steel bridgesJournal of Constructional Steel Research, 2010
- Ein ungewöhnliches Stabilitä verursacht SchadensfallStahlbau, 2008
- An analysis of the cyclic behaviour of steel gusset plate connectionsJournal of Constructional Steel Research, 1998
- Bracing Connections for Heavy ConstructionEngineering Journal, 1984
- Work of Rivets in Riveted JointsTransactions of the American Society of Civil Engineers, 1934