Effect of different electrolytes on electrochemical micro-machining of SS 316L
Open Access
- 1 January 2022
- journal article
- research article
- Published by National Library of Serbia in Chemical Industry and Chemical Engineering Quarterly
- Vol. 28 (4) , 329-337
Abstract
The use of stainless steel 316L (SS 316L) in industries such as medical, marine, aerospace, bio-medical, and automobile sectors is increasing rapidly. Electrochemical micro-machining (ECMM) is the apt method for machining SS 316L due to its burr-free machining surface, no residual stress, and high precision. However, there are some limitations found in the usage of strong electrolytes such as HCl, H2SO4, KOH, NaNO3, and NaCl, which are reportedly facing difficulties in disposing it to the environment and handling issues. Hence, this paper addresses to overcome the disadvantages faced in ECMM process when using strong electrolytes to machine SS 316L, so therefore different organic electrolytes such as tartaric acid (C4H6O6), citric acid (C6H8O7), and a combination of tartaric and citric acid electrolyte (mixed electrolyte) are considered to select the best electrolyte. Process parameters like machining voltage, duty cycle, and electrolyte concentration are included in determining the performance of machining. The performance of ECMM is evaluated using material removal rate (MRR) and overcut. The overcut of tartaric acid electrolyte is found to be 179% less than mixed electrolyte for the parameter combination of 12 g/l, 11 V, and 85%. The mixed electrolyte shows 114.2% higher MRR than the tartaric acid electrolyte for the parameter solutions of 25%, 11 V, and 20 g/l. Furthermore, the citric acid electrolyte shows the second lowest overcut and higher MRR in all aspects of machining performance. Field emission scanning electron microscope (FESEM) studies are carried out to realise the effect of electrolyte on the machining surface.Keywords
This publication has 31 references indexed in Scilit:
- Performance of electrochemical micromachining of copper through infrared heated electrolyteMaterials and Manufacturing Processes, 2017
- Electrochemical micromachining of micro-dimple arrays on the surface of Ti-6Al-4V with NaNO3 electrolyteThe International Journal of Advanced Manufacturing Technology, 2016
- Photocatalytic hydrogen production from biomass-derived compounds: a case study of citric acidEnvironmental Technology, 2016
- Electrochemical machining of 20MnCr5 alloy steel with ferric nitrate mixed aqueous NaCl electrolyteInternational Journal of Machining and Machinability of Materials, 2015
- Effect of Bubble Size on Aeration ProcessAsian Journal of Scientific Research, 2014
- Mathematical modeling of electrical conductivity in electrolyte solution between two gas-evolving electrodesRussian Journal of Electrochemistry, 2014
- Hydrogen production on TiO2 nanorod arrays cathode coupling with bio-anode with additional electricity generationJournal of Power Sources, 2013
- A temperature dependent multi-ion model for time accurate numerical simulation of the electrochemical machining process. Part II: Numerical simulationElectrochimica Acta, 2012
- Review of applications of high-field asymmetric waveform ion mobility spectrometry (FAIMS) and differential mobility spectrometry (DMS)The Analyst, 2007
- Conductivity studies of aqueous solutions of stereoisomers of tartaric acids and tartrates. Part II: D-, L-, andmeso-tartaric acidsJournal of Solution Chemistry, 1997