Influence of Pre-Tinning Process on Coating Morphology and Interface Structure of Low Carbon Steel Dipped in Molten 6061 Al Alloy
Open Access
Abstract
Pre-treated low carbon steel specimens with flux or flux + tin mixture were coated by hot-dip aluminizing process. Al alloy (6061) was melted and hold at 750 °C. Fluxed and pre-tinned low carbon steel samples were dipped in a molten bath for time intervals of 0.5, 1, 2.5 and 3.5 min. Applying double coating processes via tinning-aluminizing techniques facilitated the formation of Fe-Al intermetallic interface and increasing the thickness of homogenous coating layer over the substrate material. The presence of Sn facilitates to great extent the formation of a better interlayer-free bond of residual flux and/or oxides. The fluxed–dipped steel substrates have inhomogeneous distribution of Al alloy coating as well as an interface with residual flux and oxides for dipping time up to 2.5 min. A homogenous distribution with good thickness morphology of the Al alloy coating and homogeneous thin intermetallic interface was achieved for tinned steel substrate at all applied dipping times. The comparison between the pre-tinning and pre-fluxing processes on steel substrates showed a significant effect of tinning over fluxing treatment acting on the thickness layer of Al-coating and interface using a short time dipping. For dipping time up to 2.5 min, the hardness of pre-tinning substrates is greater than that of fluxed ones due to the presence of residual flux and void interface in fluxed steel.Keywords
Funding Information
- Scientific Research Deanship at University of Ha’il—Saudi Arabia (RG-21097)
This publication has 21 references indexed in Scilit:
- A novel electrodeposition route for fabrication of the superhydrophobic surface with unique self-cleaning, mechanical abrasion and corrosion resistance propertiesChemical Engineering Journal, 2016
- Observation of high-temperature phase transformation in the Si-modified aluminide coating on mild steel using EBSDMaterials Characterization, 2010
- EBSD Study of Crystallographic Identification on Fe-Al-Si Intermetallic Phases in Aluminide Coatings on Mild SteelsAdvanced Materials Research, 2009
- Microstructure studies of an aluminide coating on 9Cr-1Mo steel during high temperature oxidationSurface and Coatings Technology, 2006
- The high-temperature oxidation behavior of hot-dipping Al–Si coating on low carbon steelSurface and Coatings Technology, 2006
- Al-Fe-Si (aluminum-iron-silicon)Journal of Phase Equilibria and Diffusion, 2002
- Thermodynamic evaluation of Fe-Sn phase diagramCalphad, 1996
- Aluminium Diffusion Coatings on Medium Carbon SteelMaterials Transactions, JIM, 1995
- Metallurgy of continuous hot dip aluminizingInternational Materials Reviews, 1994
- Intermetallic phases formed during tin implantation into iron and steelsJournal of Applied Physics, 1984