A New Sensor for Simultaneous Measurement of Strain and Temperature
- 27 August 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 32 (19) , 1253-1256
Abstract
A new cascaded structure based on two long-period fiber gratings (LPFGs) for simultaneous measurement of strain and temperature is proposed and studied. The proposed structure is cascaded by a LPFG and a S-type long-period fiber grating (S-LPFG). The LPFG is fabricated using the CO2 laser by etched method. The S-LPFG is fabricated using the CO2 laser by polished method. The grooves of the S-LPFG are staggered in opposite directions, and this special geometry results in high strain sensitivity. The experimental results show that the strain sensitivities of the two resonant dips of the cascaded structure are 16.31 pm/με and -2.42 pm/με with the range of 0-500 με, respectively. Strain sensitivity varies greatly between two dips and the resonant wavelength shifts in the opposite direction. The temperature sensitivities of the two resonant dips of the cascaded structure are 59.73 pm/°C and 60.38 pm/°C, respectively. Since the difference between temperature and strain sensitivity, matrix method can be used for simultaneous measurement of two parameters. The feasibility of the cascaded structure has been experimentally demonstrated for the simultaneous measurement. Therefore, the cascaded structure has the potential to measure strain and temperature simultaneously.Keywords
Funding Information
- Joint Research Fund in Astronomy under Cooperative Agreement between the National Natural Science Foundation of China (NSFC) and the Chinese Academy of Sciences (U1631239, U1831115, U1931206)
- Key project of the Natural Science Foundation of Heilongjiang province (ZD2019H003)
- Fundamental Research Funds for the Central Universities of Harbin Engineering University
This publication has 16 references indexed in Scilit:
- Simultaneous strain and temperature sensor based on polarization maintaining fiber and multimode fiberOptics & Laser Technology, 2018
- Automatic Arc Discharge-Induced Helical Long Period Fiber Gratings and Its Sensing ApplicationsIEEE Photonics Technology Letters, 2017
- Liquid modified photonic crystal fiber for simultaneous temperature and strain measurementPhotonics Research, 2017
- Combining Two Types of Gratings for Simultaneous Strain and Temperature MeasurementIEEE Photonics Technology Letters, 2015
- Highly Integrated FP/FBG Sensor for Simultaneous Measurement of High Temperature and StrainIEEE Photonics Technology Letters, 2014
- Simultaneous measurement of strain and temperature using a long period fiber grating based on waist-enlarged fusion bitapersJournal of Optics, 2014
- Intensity-Modulated Strain Sensor Based on Fiber In-Line Mach–Zehnder InterferometerIEEE Photonics Technology Letters, 2013
- Tunable Polymer Fiber Bragg Grating (FBG) Inscription: Fabrication of Dual-FBG Temperature Compensated Polymer Optical Fiber Strain SensorsIEEE Photonics Technology Letters, 2011
- Asymmetrical Fiber Mach–Zehnder Interferometer for Simultaneous Measurement of Axial Strain and TemperatureIEEE Photonics Journal, 2010
- Highly Sensitive Temperature-Independent Strain Sensor Based on a Long-Period Fiber Grating With a CO$_{2}$-Laser Engraved Rotary StructureIEEE Photonics Technology Letters, 2009