Structure, processing, property correlation of metastable β titanium Ti-5Al-5Mo-5V-3Cr alloy
- 11 July 2022
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 238 (2) , 659-666
Abstract
This work reports the evolution of “Structure, Processing, Property Correlation of Metastable β Titanium Ti-5Al-5Mo-5V-3Cr alloy” as a function of different aging temperatures (625,725 and 775 °C) for 4 h subsequent to solution heat treatment. The hot-rolled sheet was heat treated in β phase field and then water quenched. The solution heat treated in β phase field and then water quenched samples were aged at 625, 725 and 775 °C for 4 h. The hot-rolled sample shows the presence of α and β phases. The β-solution heat treated in β phase field and then water quenched sample of the alloy exhibits single β phase. The intensities of X-ray peaks are varying and β (211) peak shows the maximum intensity. The maximum intensity can be ascribed to β (211) texture. The solution heat treated in β phase field and then water quenched sample aged at 625 °C for 4 h shows the very fine hexagonal α phase precipitates as compared to the samples aged at 725 and 775 °C for 4 h. The samples aged at 725 and 775 °C for 4 h has resulted in precipitate-free zones as a result of the rejection of Mo, V, and Cr (β stabilizing elements) during nucleation and growth of α precipitates along the β grain boundaries. The Vickers hardness values of the alloy increase from solution heat treated in β phase field and then water quenched to all aging temperatures. The sample aged at 625 °C for 4 h shows the maximum hardness which is due to the presence of fine α phase precipitates. This can be ascribed to typical precipitation hardening.Keywords
Funding Information
- Defence Research and Development Organisation (DMRL-123)
This publication has 10 references indexed in Scilit:
- Effect of Alloying Elements in Hot-Rolled Metastable β-Titanium Alloys. Part II: Mechanical PropertiesMetallurgical and Materials Transactions A, 2016
- Effect of solution treatment and aging on microstructure and tensile properties of high strength β titanium alloy, Ti–5Al–5V–5Mo–3CrMaterials & Design (1980-2015), 2015
- Microstructure–fracture toughness correlation in an aircraft structural component alloy Ti–5Al–5V–5Mo–3CrMaterials Science and Engineering: A, 2013
- Deformation-induced microstructure refinement in primary α phase-containing Ti–10V–2Fe–3Al alloyMaterials Science and Engineering: A, 2010
- Attributes, characteristics, and applications of titanium and its alloysJOM, 2010
- The Flow Behavior and Microstructural Evolution of Ti-5Al-5Mo-5V-3Cr during Subtransus Isothermal ForgingMetallurgical and Materials Transactions A, 2009
- Development of chevron-shaped α precipitates in Ti–5Al–5Mo–5V–3CrScripta Materialia, 2009
- Thermomechanical processing of Ti–5Al–5Mo–5V–3CrMaterials Science and Engineering: A, 2008
- The Use of β Titanium Alloys in the Aerospace IndustryJournal of Materials Engineering and Performance, 2005
- An overview on the use of titanium in the aerospace industryMaterials Science and Engineering: A, 1996