Improving mechanical and thermal properties of graphite–aluminium composite using Si, SiC and eggshell particles
Authors:
- 11 December 2019
- journal article
- review article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 54 (17) , 2365-2376
Abstract
Graphite–aluminium (Gr–Al) composites are being used for diverse engineering applications because of their light weight, good electrical conductivity and thermal properties. However, their applications are limited by high coefficient of thermal expansion and low microhardness values which can be enhanced by adding cheap and efficient fillers. This paper reports the effect of addition of eggshell (ES) particles on the properties of sintered Gr–Al-based composites. Five different composites (Gr–Al, Gr–Al + 20 wt.%Si, Gr–Al + 20 wt.%SiC, Gr–Al + 20Si wt.% + 20 wt.%ES and Gr–Al + 20SiC wt.% + 20 wt.%ES) were sintered at a temperature of 540 ℃, holding time of 10 min, heating rate of 52 ℃/min and pressure of 50 MPa using spark plasma sintering system. The sintered samples were characterized based on morphology, microhardness, relative density, coefficient of thermal expansion and electrical conductivity. Based on SEM images, graphite particles of flake-like structure were largely undeformed while Al particles were smaller, round and irregular in shape and fairly uniformly distributed in the composites. The microhardness value of sintered Gr–Al + 20 wt.%SiC + 20 wt.%ES composite was 39.55 HV compared to 30.46 HV for Gr–Al, the least of the samples. The Gr–Al + 20 wt.%SiC + 20 wt.%ES composite also has a very low thermal expansion coefficient (0.98 × 10−5/K) but lowest electrical conductivity at temperature beyond 150 ℃. Highest densification and minimum relative density (94%) were obtained in Gr–Al + 20 wt.%Si + 20 wt.%ES composite. These enhanced performances are largely due to the incorporation of ES particles. This study therefore demonstrated that ESs particles enhanced microhardness and lowered thermal expansion of Gr–Al-based composites which have promising applications in industries especially for thermal management.Keywords
This publication has 23 references indexed in Scilit:
- Virulence of four Beauveria bassiana (Balsamo) (Asc., Hypocreales) isolates on rose sawfly, Arge rosae under laboratory conditionJournal of King Saud University – Science, 2015
- Effect of Graphene Nanoplatelets addition on mechanical properties of pure aluminum using a semi-powder methodProgress in Natural Science: Materials International, 2014
- Strengthening alumina ceramic matrix nanocomposites using spark plasma sintering2014
- Densification mechanisms in spark plasma sintering: Effect of particle size and pressurePowder Technology, 2012
- The eggshell: structure, composition and mineralizationFrontiers in Bioscience-Landmark, 2012
- Constitutive modeling of the behaviour of cermet compacts during reaction sinteringPowder Technology, 2011
- Sintering densification curve: A practical approach for its construction from dilatometric shrinkage dataScience of Sintering, 2008
- Eggshell, a new bio-filler for polypropylene compositesMaterials Letters, 2007
- Pressure infiltration of Al–12wt.% Si–X (X=Cu, Ti, Mg) alloys into graphite particle preformsActa Materialia, 2006
- Thermal and Mechanical Properties of Eggshell Under Different TreatmentsTransactions of the ASAE, 1996