Biodiesel Characterization and Prediction Using ANN Modeling along with the Assessment of Performance and Emission Behavior of Fuel Sources— Gossypium hirsutum and Stoechospermum marginatum —Used in Direct Injection CI Engine
Authors:
- 16 October 2025
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
The demand for alternate fuel continues to grow steadily, while energy sources are being researched and explored every year. Considering the energy demand and fuel cost this research was initiated to identify better sources for fuel production. Also the emission released into the atmosphere causes significant influence in the global market in terms of pollution, which was also a prime motive toward this research analysis. A green biodiesel, fatty acid alkyl ester, has attracted much attention as an environmentally friendly diesel fuel. This is due to several advantages, especially that fatty acid alkyl ester is renewable, biodegradable, and has less toxic properties as a fuel. In this article, cottonseed (Gossypium hirsutum) biodiesel and algal (Stoechospermum marginatum) biodiesel was prepared with a yield of 94% and 85%, respectively. Single-stage transesterification was performed since the free fatty acid percentage was within the limit. The performance characteristics in terms of brake thermal efficiency and brake specific fuel consumption, algal biodiesel performed better in comparison with cottonseed biodiesel, and its values were closer to standard diesel fuel. The maximum BTE of ABD100 was noticed to be 36.2% and optimized BSFC was 17 kg/kW-h for ABD100. The emission characteristic analysis stated that biodiesel detailed lower CO emission than diesel fuel, at high loads UBHC were lower for biodiesel than diesel fuel, up to 6% and 18% difference. NOx emission was higher for biodiesel, which may be due to better combustion and the diesel fuel produced higher smoke emission, whereas biodiesel depicted lower emission values. Comparatively, algal biodiesel was found to be better, which showcased lower ignition delay and better engine emissions.Keywords
This publication has 28 references indexed in Scilit:
- Experimental investigation of performance, emission, and combustion characteristics of a diesel engine using blends of waste cooking oil-ethanol biodiesel with MWCNT nanoparticlesCase Studies in Thermal Engineering, 2024
- Diesel-engine generator tests fueled with ethyl and methyl esters of palm oil as catalyzed by potassium hydroxideEnergy Reports, 2023
- The performance and emission of a generator-diesel engine fueled with palm oil methyl ester combined with carbureting biobutanolEnergy Reports, 2023
- Characterization of a high-speed compression ignition engine fueled with ethyl and methyl esters of palm oilEnergy Reports, 2022
- Effect of alcoholic and nano-particles additives on tribological properties of diesel–palm–sesame–biodiesel blendsEnergy Reports, 2021
- Experimental investigation to enhance the low‐temperature nitrogen oxide emission reduction in biodiesel exhaust using selective catalytic reduction with direct ammonia injection and manganese cerium zirconia catalystEnvironmental Progress & Sustainable Energy, 2021
- Exhaust emissions and engine performance analysis of a marine diesel engine fuelledwith Parinari polyandra biodiesel–diesel blendsEnergy Reports, 2020
- Kinetics and optimization studies using Response Surface Methodology in biodiesel production using heterogeneous catalystChemical Engineering Research and Design, 2018
- Artificial neural network models to predict density, dynamic viscosity, and cetane number of biodieselFuel, 2015
- Artificial neural network (ANN) approach for modeling Zn(II) adsorption from leachate using a new biosorbentChemical Engineering Journal, 2011