Prathik Jain Sudhir
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Prathik Jain Sudhir has a total of 100 co-authors. Here are the top co-authors by number of shared publications:
- Chethan Kn
Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, India
6 shared publications Ugrasen Gonchikar
BMS. College of Engineering
5 shared publications- Athimoolam Sundaramahalingam
Dayananda Sagar College of Engineering
4 shared publications G. Ugrasen
4 shared publications- Laxmikant G. Keni
Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal 576104, Karnataka, India
4 shared publications H.V. Ravindra
PES College of Engineering
3 shared publications
Latest Publications
- Open Access
- 31 August 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (9) , 461
Electrospun Polymeric Composites for Dental Tissue Engineering: Materials, Fabrication Strategies, Biological Performance, and Clinical Translation
Oral diseases impact approximately 3.5 billion individuals globally, often leading to the loss or damage of periodontal, alveolar bone, dentin-pulp, or oral soft tissues. Consequently, dental tissue engineering necessitates scaffolds that can simultaneously offer a three-dimensional extracellular matrix-like microenvironment conducive to cell adhesion, migration, and differentiation. These scaffolds must also maintain spatial and mechanical integrity during the healing process and degrade at a rate that aligns with new tissue formation. Conventional biomaterials frequently fail to meet all these criteria. Natural polymers, such as collagen, provide cell-recognition cues and support cellular responses but may lose mechanical integrity before regeneration is complete. In contrast, many synthetic polymer barriers maintain structural stability and offer adjustable degradation rates but exhibit limited intrinsic bioactivity. Electrospinning offers a method to integrate these complementary characteristics into fibrous scaffolds with high surface areas that replicate essential structural aspects of the native extracellular matrix. This structure provides cells with a greater surface area for adhesion, migration, and remodeling than cast films or solid scaffolds. This review brings together the electrospinning literature related to dental applications. It begins with the basics of the process, including Taylor cone formation, jet whipping, and the solution, instrument, and environmental factors that influence fiber diameter and morphology, as well as variations such as coaxial, emulsion, melt electrowriting, and needleless electrospinning. It then explores the natural, synthetic, and composite polymer systems used to produce dental nanofibers and their applications in periodontal regeneration, alveolar bone repair, dentin-pulp regeneration, antibacterial and drug delivery functions, and oral wound healing. The obstacles, such as low production throughput, inconsistent sterilization and testing protocols, and the scarcity of large-animal and human trials, that still hinder the transition of laboratory-scale electrospun scaffolds to regular use in dental practice are discussed, and the research directions most likely to bridge this gap are highlighted.
- 31 August 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (9) , 461
Open AccessElectrospun Polymeric Composites for Dental Tissue Engineering: Materials, Fabrication Strategies, Biological Performance, and Clinical Translation
Oral diseases impact approximately 3.5 billion individuals globally, often leading to the loss or damage of periodontal, alveolar bone, dentin-pulp, or oral soft tissues. Consequently, dental tissue engineering necessitates scaffolds that can simultaneously offer a three-dimensional extracellular matrix-like microenvironment conducive to cell adhesion, migration, and differentiation. These scaffolds must also maintain spatial and mechanical integrity during the healing process and degrade at a rate that aligns with new tissue formation. Conventional biomaterials frequently fail to meet all these criteria. Natural polymers, such as collagen, provide cell-recognition cues and support cellular responses but may lose mechanical integrity before regeneration is complete. In contrast, many synthetic polymer barriers maintain structural stability and offer adjustable degradation rates but exhibit limited intrinsic bioactivity. Electrospinning offers a method to integrate these complementary characteristics into fibrous scaffolds with high surface areas that replicate essential structural aspects of the native extracellular matrix. This structure provides cells with a greater surface area for adhesion, migration, and remodeling than cast films or solid scaffolds. This review brings together the electrospinning literature related to dental applications. It begins with the basics of the process, including Taylor cone formation, jet whipping, and the solution, instrument, and environmental factors that influence fiber diameter and morphology, as well as variations such as coaxial, emulsion, melt electrowriting, and needleless electrospinning. It then explores the natural, synthetic, and composite polymer systems used to produce dental nanofibers and their applications in periodontal regeneration, alveolar bone repair, dentin-pulp regeneration, antibacterial and drug delivery functions, and oral wound healing. The obstacles, such as low production throughput, inconsistent sterilization and testing protocols, and the scarcity of large-animal and human trials, that still hinder the transition of laboratory-scale electrospun scaffolds to regular use in dental practice are discussed, and the research directions most likely to bridge this gap are highlighted.
- 6 May 2026
- Published by World Scientific Pub Co Pte Ltd in International Journal of Computational Materials Science and Engineering
Performance analysis of nature-inspired honeycomb architectures for aerospace structures
This project explores the potential of bio-inspired honeycomb structures for aerospace applications, focusing on the structural advantages of a trabeculae honeycomb design inspired by beetles. Initially, the research involved analyzing conventional honeycomb structures and their applications, followed by a detailed study of various bio-inspired designs. Through an extensive literature review, the trabeculae honeycomb structure was identified as a promising candidate due to its superior mechanical properties. The trabeculae honeycomb structure was modeled using CAD software and 3D-printed using PLA material. The structure is made up of a number of polygonal cells strengthened with trabeculae-like struts positioned at the vertices, similar to the natural architecture of Elytron Beetle Trabeculae. This one-of-a-kind arrangement increases compressive and bending strength, reduces buckling, and provides multi-directional stress distribution while keeping a lightweight profile. Finite Element Analysis and experimental tests, including compression, buckling, and bending, were conducted to evaluate the performance of the trabeculae design. The experimental validation was performed using a digital Universal Testing Machine to ensure precise measurement of mechanical behavior. The results demonstrated that the trabeculae honeycomb structure exhibits enhanced stiffness, reduced deformation, and improved energy absorption compared to conventional designs, making it highly suitable for weight-critical aerospace applications. This study highlights the potential of bio-inspired designs in advancing structural performance and material efficiency in the aerospace sector.
- 6 May 2026
- Published by World Scientific Pub Co Pte Ltd in International Journal of Computational Materials Science and Engineering
Performance analysis of nature-inspired honeycomb architectures for aerospace structures
This project explores the potential of bio-inspired honeycomb structures for aerospace applications, focusing on the structural advantages of a trabeculae honeycomb design inspired by beetles. Initially, the research involved analyzing conventional honeycomb structures and their applications, followed by a detailed study of various bio-inspired designs. Through an extensive literature review, the trabeculae honeycomb structure was identified as a promising candidate due to its superior mechanical properties. The trabeculae honeycomb structure was modeled using CAD software and 3D-printed using PLA material. The structure is made up of a number of polygonal cells strengthened with trabeculae-like struts positioned at the vertices, similar to the natural architecture of Elytron Beetle Trabeculae. This one-of-a-kind arrangement increases compressive and bending strength, reduces buckling, and provides multi-directional stress distribution while keeping a lightweight profile. Finite Element Analysis and experimental tests, including compression, buckling, and bending, were conducted to evaluate the performance of the trabeculae design. The experimental validation was performed using a digital Universal Testing Machine to ensure precise measurement of mechanical behavior. The results demonstrated that the trabeculae honeycomb structure exhibits enhanced stiffness, reduced deformation, and improved energy absorption compared to conventional designs, making it highly suitable for weight-critical aerospace applications. This study highlights the potential of bio-inspired designs in advancing structural performance and material efficiency in the aerospace sector.
- Open Access
- 20 April 2026
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 23 (1)
Dry Sliding Wear Behavior and Wear Mechanisms of Epoxy Composites Reinforced with Hybrid Long Banana–Jute Fibers
- 20 April 2026
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 23 (1)
Open AccessDry Sliding Wear Behavior and Wear Mechanisms of Epoxy Composites Reinforced with Hybrid Long Banana–Jute Fibers
- Open Access
- 3 April 2026
- Published by MDPI AG in Prosthesis
- Vol. 8 (4) , 36
Finite Element Analysis of Collared Hip Prosthesis Cross-Sections Under Dynamic Loading and Wear Conditions for Durable Orthopedic Implant Design
Background/Objective: Traditional hip implant evaluations often overlook patient-specific dynamic loadings. This study investigates the performance of novel collared hip implant designs under walking conditions, focusing on geometric profiles and two common stem materials: Ti-6Al-4V and CoCr alloy. Methods: Patient-specific dynamic forces were applied using commercial finite element analysis, adhering to ISO and ASTM standards. Four cross-sectional profiles—circular, elliptical, oval, and trapezoidal—were initially evaluated for induced stresses and displacements. Subsequently, wear characteristics at implant junctions were analyzed, comparing CoCr (MC 1) and Ti-6Al-4V (MC 2) stems. The study also assessed the impact of using Ultra-High Molecular Weight Polyethylene (UHMWPE) acetabular cups. Results: The elliptical (CS 2) cross-sectional profile demonstrated superior performance. Junction analysis revealed that the CoCr stem (MC 1) exhibited a stem-to-head sliding distance four times higher and contact pressure 5.5 times higher than the Ti-6Al-4V stem (MC 2). Specifically, MC 1 showed 82% higher contact pressure and 89% greater sliding distance at the stem–head junction compared to MC 2. Additionally, utilizing UHMWPE cups effectively eliminated squeaking sounds attributed to CoCr cups due to superior wear resistance. Conclusions: The combination of an elliptical (CS 2) cross-sectional profile with a Ti-6Al-4V stem and UHMWPE acetabular cup offers optimal performance. This configuration significantly reduces wear and contact pressure, suggesting enhanced functionality and durability for hip implants under dynamic loading conditions.
- 3 April 2026
- Published by MDPI AG in Prosthesis
- Vol. 8 (4) , 36
Open AccessFinite Element Analysis of Collared Hip Prosthesis Cross-Sections Under Dynamic Loading and Wear Conditions for Durable Orthopedic Implant Design
Background/Objective: Traditional hip implant evaluations often overlook patient-specific dynamic loadings. This study investigates the performance of novel collared hip implant designs under walking conditions, focusing on geometric profiles and two common stem materials: Ti-6Al-4V and CoCr alloy. Methods: Patient-specific dynamic forces were applied using commercial finite element analysis, adhering to ISO and ASTM standards. Four cross-sectional profiles—circular, elliptical, oval, and trapezoidal—were initially evaluated for induced stresses and displacements. Subsequently, wear characteristics at implant junctions were analyzed, comparing CoCr (MC 1) and Ti-6Al-4V (MC 2) stems. The study also assessed the impact of using Ultra-High Molecular Weight Polyethylene (UHMWPE) acetabular cups. Results: The elliptical (CS 2) cross-sectional profile demonstrated superior performance. Junction analysis revealed that the CoCr stem (MC 1) exhibited a stem-to-head sliding distance four times higher and contact pressure 5.5 times higher than the Ti-6Al-4V stem (MC 2). Specifically, MC 1 showed 82% higher contact pressure and 89% greater sliding distance at the stem–head junction compared to MC 2. Additionally, utilizing UHMWPE cups effectively eliminated squeaking sounds attributed to CoCr cups due to superior wear resistance. Conclusions: The combination of an elliptical (CS 2) cross-sectional profile with a Ti-6Al-4V stem and UHMWPE acetabular cup offers optimal performance. This configuration significantly reduces wear and contact pressure, suggesting enhanced functionality and durability for hip implants under dynamic loading conditions.
- Open Access
- 7 March 2026
- Published by Carbon Magics Ltd in International Journal of Vehicle Structures & Systems
- Vol. 18 (2)
Analysis of Subsonic Flow Over Delta Wing
The current study examines the aerodynamic characteristics of Delta wing designs which are especially useful for high-speed aircraft. Within subsonic analysis, the Delta wing has numerous benefits. Strong vortices are created at the tips of its wings by its unique design, which increases lift and improves manoeuvrability at low speeds. The model of Delta wing without aerofoil is created and analysis of the same model is carried out using ANSYS. The Delta wing using NACA 64-206 is also modelled and analysis is performed and aerodynamic parameters are calculated. On comparing the results, Delta wing with aerofoil performs better as compared to Delta wing without aerofoil, Hence, pressure distribution and vortex breakdown are assessed for the Delta wing with aerofoil. Using Fusion Deposition Modelling (FDM) process the wing model is fabricated using Polylactide (PLA) material. Fabricated wing model is utilized for flow visualization by varying the angle of attack (AoA) and vortex formation is visualized near the trailing edge and wing tips. It was found that the experimental results correlate well with the analytical results. The fabricated model is then used to determine the lift. The results show that after 18( AoA, the stalling takes place as observed by the numerical method.
- 7 March 2026
- Published by Carbon Magics Ltd in International Journal of Vehicle Structures & Systems
- Vol. 18 (2)
Open AccessAnalysis of Subsonic Flow Over Delta Wing
The current study examines the aerodynamic characteristics of Delta wing designs which are especially useful for high-speed aircraft. Within subsonic analysis, the Delta wing has numerous benefits. Strong vortices are created at the tips of its wings by its unique design, which increases lift and improves manoeuvrability at low speeds. The model of Delta wing without aerofoil is created and analysis of the same model is carried out using ANSYS. The Delta wing using NACA 64-206 is also modelled and analysis is performed and aerodynamic parameters are calculated. On comparing the results, Delta wing with aerofoil performs better as compared to Delta wing without aerofoil, Hence, pressure distribution and vortex breakdown are assessed for the Delta wing with aerofoil. Using Fusion Deposition Modelling (FDM) process the wing model is fabricated using Polylactide (PLA) material. Fabricated wing model is utilized for flow visualization by varying the angle of attack (AoA) and vortex formation is visualized near the trailing edge and wing tips. It was found that the experimental results correlate well with the analytical results. The fabricated model is then used to determine the lift. The results show that after 18( AoA, the stalling takes place as observed by the numerical method.
- Open Access
- 5 January 2026
- Published by Informatics Publishing Limited in Journal of Mines, Metals and Fuels
- p. 61-73
Experimental Testing of Hybrid Composite of Kevlar and Basalt Under Low Velocity Impact and Flammability Test
Aiming at aerospace applications where impact resistance and fire safety are vital, the present work studies the mechanical and flammability performance of hybrid Fibre-Reinforced Polymer (FRP) composites made of Kevlar and basalt fibres. The Low-Velocity Impact (LVI), flammability, compression, and interlaminar shear tests were executed on five different stacking sequences—Kevlar-Kevlar-Basalt (KKB), Basalt-Basalt-Kevlar (BBK), and their variations that were created by hand layup methods. With an interlaminar shear strength of 12.09 N/mm2 and a compressive strength of 53.66 N/mm2, the BBK configuration outperformed KKB 9.35 N/mm2 and 29.65 N/mm2, respectively. It’s because the basalt has a higher volume fraction and is stiffer than KKB. Kevlar-dominated laminates (KKB and NK), on the other hand, demonstrated notable impact resistance, with damage areas as small as 81.41mm². However, hybridisation with basalt marginally decreased energy absorption by about 4%. Flammability testing showed that BBK (V-1) and BKBK (V-2) offer moderate-to-poor fire resistance, while KKB obtained a UL-94 V-0 rating, which is defined by minimal flame propagation (2.94 mm/min) and no dripping. The role of fibre volume fractions in predicting mechanical behaviour was validated by the strong correlation between analytical modelling using the rule-of-mixtures and experimental data. These results demonstrate how the performance of Kevlar-basalt hybrids can be altered, with KKB performing best in fire-critical settings and BBK performing best in structural applications. The study offers practical advice for creating next-generation composites with implications for the automotive, aerospace, and defence industries that strike a balance between mechanical strength, thermal stability, and impact resilience. Major Findings: BBK exhibited superior mechanical performance, achieving higher Interlaminar Shear Strength (ILSS) (12.09 N/mm2) and compressive strength (53.66 N/mm2) compared to Kevlar-dominant KKB. Kevlar-based configurations showed better impact resistance, while basalt improved thermal stability, though KKB achieved the best flammability rating (UL-94 V-0). Overall, hybridisation enables tailoring composites for structural strength and fire-critical applications.
- 5 January 2026
- Published by Informatics Publishing Limited in Journal of Mines, Metals and Fuels
- p. 61-73
Open AccessExperimental Testing of Hybrid Composite of Kevlar and Basalt Under Low Velocity Impact and Flammability Test
Aiming at aerospace applications where impact resistance and fire safety are vital, the present work studies the mechanical and flammability performance of hybrid Fibre-Reinforced Polymer (FRP) composites made of Kevlar and basalt fibres. The Low-Velocity Impact (LVI), flammability, compression, and interlaminar shear tests were executed on five different stacking sequences—Kevlar-Kevlar-Basalt (KKB), Basalt-Basalt-Kevlar (BBK), and their variations that were created by hand layup methods. With an interlaminar shear strength of 12.09 N/mm2 and a compressive strength of 53.66 N/mm2, the BBK configuration outperformed KKB 9.35 N/mm2 and 29.65 N/mm2, respectively. It’s because the basalt has a higher volume fraction and is stiffer than KKB. Kevlar-dominated laminates (KKB and NK), on the other hand, demonstrated notable impact resistance, with damage areas as small as 81.41mm². However, hybridisation with basalt marginally decreased energy absorption by about 4%. Flammability testing showed that BBK (V-1) and BKBK (V-2) offer moderate-to-poor fire resistance, while KKB obtained a UL-94 V-0 rating, which is defined by minimal flame propagation (2.94 mm/min) and no dripping. The role of fibre volume fractions in predicting mechanical behaviour was validated by the strong correlation between analytical modelling using the rule-of-mixtures and experimental data. These results demonstrate how the performance of Kevlar-basalt hybrids can be altered, with KKB performing best in fire-critical settings and BBK performing best in structural applications. The study offers practical advice for creating next-generation composites with implications for the automotive, aerospace, and defence industries that strike a balance between mechanical strength, thermal stability, and impact resilience. Major Findings: BBK exhibited superior mechanical performance, achieving higher Interlaminar Shear Strength (ILSS) (12.09 N/mm2) and compressive strength (53.66 N/mm2) compared to Kevlar-dominant KKB. Kevlar-based configurations showed better impact resistance, while basalt improved thermal stability, though KKB achieved the best flammability rating (UL-94 V-0). Overall, hybridisation enables tailoring composites for structural strength and fire-critical applications.
- Open Access
- 8 December 2025
- Published by Informatics Publishing Limited in Journal of Mines, Metals and Fuels
- p. 3719-3727
Sustainable 3D Printing: Investigation on the Mechanical Properties of Bamboo-Reinforced PLA Biocomposites Filaments
Fused Deposition Modeling (FDM) is the most promising additive manufacturing process used for producing thermoplastic parts for applications where reduced material waste, less cost and material transformation easiness are crucial factors. Because pure thermoplastics have noticeably low mechanical capabilities, it is necessary to enhance the mechanical characteristics of thermoplastic parts made with FDM. The objective is to analyze the mechanical characteristics of a PLA strengthened with bamboo powder through several standardized mechanical tests, establishing its suitability for applications in 3D printing and other sectors that require biodegradable and eco-friendly materials. The bamboo reinforced PLA demonstrated the improved hardness and modulus of elasticity in comparison to pure PLA samples. Pure PLA samples exhibit higher tensile strength, higher flexural strength, higher yield strength and low frictional force in comparison to bamboo composite PLA samples. The samples having line infill pattern and 100% fill density demonstrated maximum yield strength and tensile strength for both PLA and bamboo PLA. Therefore, the bamboo PLA composite can be used in applications requiring higher hardness and durability. The findings of this study advance the usage of bio composite materials in 3D printing, providing both environmental and performance benefits. Major Findings: PLA-bamboo composites showed greater tensile modulus and hardness compared to pure PLA, signifying enhanced stiffness and surface resistance. Nonetheless, the performance of pure PLA in terms of tensile, flexural, and yield strengths, along with its lower friction, was superior. With a line infill pattern and an infill density of 100%, both materials reached their maximum mechanical properties.
- 8 December 2025
- Published by Informatics Publishing Limited in Journal of Mines, Metals and Fuels
- p. 3719-3727
Open AccessSustainable 3D Printing: Investigation on the Mechanical Properties of Bamboo-Reinforced PLA Biocomposites Filaments
Fused Deposition Modeling (FDM) is the most promising additive manufacturing process used for producing thermoplastic parts for applications where reduced material waste, less cost and material transformation easiness are crucial factors. Because pure thermoplastics have noticeably low mechanical capabilities, it is necessary to enhance the mechanical characteristics of thermoplastic parts made with FDM. The objective is to analyze the mechanical characteristics of a PLA strengthened with bamboo powder through several standardized mechanical tests, establishing its suitability for applications in 3D printing and other sectors that require biodegradable and eco-friendly materials. The bamboo reinforced PLA demonstrated the improved hardness and modulus of elasticity in comparison to pure PLA samples. Pure PLA samples exhibit higher tensile strength, higher flexural strength, higher yield strength and low frictional force in comparison to bamboo composite PLA samples. The samples having line infill pattern and 100% fill density demonstrated maximum yield strength and tensile strength for both PLA and bamboo PLA. Therefore, the bamboo PLA composite can be used in applications requiring higher hardness and durability. The findings of this study advance the usage of bio composite materials in 3D printing, providing both environmental and performance benefits. Major Findings: PLA-bamboo composites showed greater tensile modulus and hardness compared to pure PLA, signifying enhanced stiffness and surface resistance. Nonetheless, the performance of pure PLA in terms of tensile, flexural, and yield strengths, along with its lower friction, was superior. With a line infill pattern and an infill density of 100%, both materials reached their maximum mechanical properties.
- 5 December 2025
- Published by IGI Global Scientific Publishing
- p. 147-168
Urban Air Mobility
Urban air mobility (UAM) vehicles have the significant potential to transform urban transportation in many countries by allowing unrestricted movement within city airspace. However, implementing them presents numerous challenges, including the need for adequate infrastructure, navigating regulatory frameworks, reducing noise pollution, ensuring safety and reliability, addressing public perception and acceptance, promoting energy efficiency and sustainability, integrating with existing transportation systems, managing costs and affordability, and assessing environmental impact. Additionally, the advancement in Urban Air Mobility requires contributions from multiple engineering fields, such as aerospace engineering, electrical and electronic engineering, and IoT/AI. This chapter provides an overview of the key factors in implementing UAM, following a brief introduction. The chapter mainly focuses on the current developments reported in recent articles published between 2016 and January 2024.
- 5 December 2025
- Published by IGI Global Scientific Publishing
- p. 147-168
Urban Air Mobility
Urban air mobility (UAM) vehicles have the significant potential to transform urban transportation in many countries by allowing unrestricted movement within city airspace. However, implementing them presents numerous challenges, including the need for adequate infrastructure, navigating regulatory frameworks, reducing noise pollution, ensuring safety and reliability, addressing public perception and acceptance, promoting energy efficiency and sustainability, integrating with existing transportation systems, managing costs and affordability, and assessing environmental impact. Additionally, the advancement in Urban Air Mobility requires contributions from multiple engineering fields, such as aerospace engineering, electrical and electronic engineering, and IoT/AI. This chapter provides an overview of the key factors in implementing UAM, following a brief introduction. The chapter mainly focuses on the current developments reported in recent articles published between 2016 and January 2024.
- 16 October 2025
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Biodiesel Characterization and Prediction Using ANN Modeling along with the Assessment of Performance and Emission Behavior of Fuel Sources— Gossypium hirsutum and Stoechospermum marginatum —Used in Direct Injection CI Engine
The demand for alternate fuel continues to grow steadily, while energy sources are being researched and explored every year. Considering the energy demand and fuel cost this research was initiated to identify better sources for fuel production. Also the emission released into the atmosphere causes significant influence in the global market in terms of pollution, which was also a prime motive toward this research analysis. A green biodiesel, fatty acid alkyl ester, has attracted much attention as an environmentally friendly diesel fuel. This is due to several advantages, especially that fatty acid alkyl ester is renewable, biodegradable, and has less toxic properties as a fuel. In this article, cottonseed (Gossypium hirsutum) biodiesel and algal (Stoechospermum marginatum) biodiesel was prepared with a yield of 94% and 85%, respectively. Single-stage transesterification was performed since the free fatty acid percentage was within the limit. The performance characteristics in terms of brake thermal efficiency and brake specific fuel consumption, algal biodiesel performed better in comparison with cottonseed biodiesel, and its values were closer to standard diesel fuel. The maximum BTE of ABD100 was noticed to be 36.2% and optimized BSFC was 17 kg/kW-h for ABD100. The emission characteristic analysis stated that biodiesel detailed lower CO emission than diesel fuel, at high loads UBHC were lower for biodiesel than diesel fuel, up to 6% and 18% difference. NOx emission was higher for biodiesel, which may be due to better combustion and the diesel fuel produced higher smoke emission, whereas biodiesel depicted lower emission values. Comparatively, algal biodiesel was found to be better, which showcased lower ignition delay and better engine emissions.
- 16 October 2025
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Biodiesel Characterization and Prediction Using ANN Modeling along with the Assessment of Performance and Emission Behavior of Fuel Sources— Gossypium hirsutum and Stoechospermum marginatum —Used in Direct Injection CI Engine
The demand for alternate fuel continues to grow steadily, while energy sources are being researched and explored every year. Considering the energy demand and fuel cost this research was initiated to identify better sources for fuel production. Also the emission released into the atmosphere causes significant influence in the global market in terms of pollution, which was also a prime motive toward this research analysis. A green biodiesel, fatty acid alkyl ester, has attracted much attention as an environmentally friendly diesel fuel. This is due to several advantages, especially that fatty acid alkyl ester is renewable, biodegradable, and has less toxic properties as a fuel. In this article, cottonseed (Gossypium hirsutum) biodiesel and algal (Stoechospermum marginatum) biodiesel was prepared with a yield of 94% and 85%, respectively. Single-stage transesterification was performed since the free fatty acid percentage was within the limit. The performance characteristics in terms of brake thermal efficiency and brake specific fuel consumption, algal biodiesel performed better in comparison with cottonseed biodiesel, and its values were closer to standard diesel fuel. The maximum BTE of ABD100 was noticed to be 36.2% and optimized BSFC was 17 kg/kW-h for ABD100. The emission characteristic analysis stated that biodiesel detailed lower CO emission than diesel fuel, at high loads UBHC were lower for biodiesel than diesel fuel, up to 6% and 18% difference. NOx emission was higher for biodiesel, which may be due to better combustion and the diesel fuel produced higher smoke emission, whereas biodiesel depicted lower emission values. Comparatively, algal biodiesel was found to be better, which showcased lower ignition delay and better engine emissions.
- Open Access
- 15 September 2025
- Published by Taylor & Francis in Cogent Engineering
- Vol. 12 (1)
Vibration characteristics on interwoven Kevlar/basalt–epoxy composite laminate with and without infused aluminum oxide nanoparticles
- 15 September 2025
- Published by Taylor & Francis in Cogent Engineering
- Vol. 12 (1)
Open AccessVibration characteristics on interwoven Kevlar/basalt–epoxy composite laminate with and without infused aluminum oxide nanoparticles