Effect of Current Density on the Performance of Ni–P–ZrO2–CeO2 Composite Coatings Prepared by Jet-Electrodeposition
Open Access
Abstract
The objective of this study was to improve the surface properties, hardness, wear resistance and electrochemical corrosion resistance of #45 steel. To this end, Ni–P–ZrO2–CeO2 composite coatings were prepared on the surface of #45 steel using the jet-electrodeposition technique by varying the current density from 20 to 60 A/dm2. The effect of current density on the performance of the composite coatings was evaluated. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD) were applied to explore the surface topography, elemental composition, hardness and electrochemical corrosion resistance of the composite coatings. The results showed that with the increase in the current density, the hardness, wear resistance, and electrochemical corrosion resistance tends to increase first and then decrease. At a current density of 40 A/dm2, the hardness reached a maximum of 688.9 HV0.1, the corrosion current reached a minimum of 8.2501 × 10−5 A·cm−2, and the corrosion potential reached a maximum of −0.45957 V. At these values, the performance of the composite coatings was optimal.Keywords
Funding Information
- National Natural Science Foundation of China (51605314)
- China Postdoctoral Science Foundation (2017M621665)
- Postdoctoral Science Foundation of Jiangsu Province (2018K022A)
- Xinjiang Production and Construction Corps (2019CB006, 2018AA008, 2018BB014)
This publication has 24 references indexed in Scilit:
- How deposition parameters affect corrosion behavior of TiO2-Al2O3 nanocomposite coatingsApplied Surface Science, 2015
- Ni–W/ZrO2 nanocomposites obtained by ultrasonic DC electrodepositionMaterials & Design (1980-2015), 2015
- Influence of surfactants on electrodeposition of a Ni-nanoparticulate SiC composite coatingTransactions of the IMF, 2015
- Mechanical properties and microstructure of Au–Ni–TiO2 nano-composite coatingsMaterials Characterization, 2015
- XPS studies on the interaction of CeO2 with silicon in magnetron sputtered CeO2 thin films on Si and Si3N4 substratesApplied Surface Science, 2013
- Effects of pulse electrodeposition parameters on the properties of Ni–TiO2 nanocomposite coatingsApplied Surface Science, 2010
- Synthesis of zirconia nanopowders from various zirconium salts via polyacrylamide gel methodJournal of the European Ceramic Society, 2008
- New Method for the Preparation and Stabilization of Nanoparticulate t ‐ZrO 2 by a Combined Sol–Gel and Solvothermal ProcessJournal of the American Ceramic Society, 2007
- Synthesis and properties of electrodeposited Ni/ceria nanocomposite coatingsSurface and Coatings Technology, 2006
- Kinetics of the Deposition of Inert Particles from Electrolytic BathsJournal of the Electrochemical Society, 1972