Fabrication of Textured Ni-Coated Carbon Tubes for a Flexible Strain Sensor: Effect of the Device Elastic Modulus on Sensor Performance
- 27 June 2023
- journal article
- research article
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 39 (27) , 9551-9563
Abstract
The exploration of flexible resistive sensors with excellent performance remains a challenge. In this paper, a nickel-coated carbon tube with a textured structure was prepared as a conductive sensitive material and inserted into the poly(dimethylsiloxane) (PDMS) polymer; interestingly, the sensor performance was controlled by the elastic modulus of the matrix resin. The results show that Pd2+ may be adsorbed by the active groups on the surface of a plant fiber as a catalytic center for the reduction of Ni2+. After 300 °C annealing, the inner plant fiber would be carbonized and attached to the outside of the nickel tube; to be precise, the textured Ni-encapsulated C tube was fabricated successfully. It is worth noting that the C tube serves as a layer of support for the external Ni coating, providing sufficient mechanical strength. In addition, resistance sensors with different properties were prepared by controlling the elasticity modulus of the PDMS polymer by introducing different contents of curing agents. The limit uniaxial tensile strain was enhanced from 42 to 49% and sensitivity reduced from 0.2 to 2.0% with the elasticity modulus of the matrix resin increasing from 0.32 to 2.2 MPa. As expected, the sensor is obviously appropriate for the detection of elbow joints, human speaking, and human joints with the reduction of the elasticity modulus of the matrix resin. To be precise, the optimal elastic modulus of the sensor matrix resin would facilitate the improvement of its sensitivity to monitor different human behaviors.Keywords
Funding Information
- Science Fund for Distinguished Young Scholars of Anhui Province (2108085QE186)
- Science and Technology Department of Zhejiang Province (2022C01177)
- Natural Science Foundation of Guangxi Province (2022GXNSFAA035607)
- Science and Technology Department of Guangxi Zhuang Autonomous Region (2020GXNSFBA159048)
This publication has 68 references indexed in Scilit:
- Graphene-Based Three-Dimensional Capacitive Touch Sensor for Wearable ElectronicsACS Nano, 2017
- Stretchable, Transparent, and Stretch-Unresponsive Capacitive Touch Sensor Array with Selectively Patterned Silver Nanowires/Reduced Graphene Oxide ElectrodesACS Applied Materials & Interfaces, 2017
- Carbonized Silk Fabric for Ultrastretchable, Highly Sensitive, and Wearable Strain SensorsAdvanced Materials, 2016
- An ultra-sensitive and rapid response speed graphene pressure sensors for electronic skin and health monitoringNano Energy, 2016
- Stretchable, Transparent, Ultrasensitive, and Patchable Strain Sensor for Human–Machine Interfaces Comprising a Nanohybrid of Carbon Nanotubes and Conductive ElastomersACS Nano, 2015
- Integrating Ultra‐Thermal‐Sensitive Fluids into Elastomers for Multifunctional Flexible SensorsAdvanced Electronic Materials, 2015
- Stretchable and Flexible High-Strain Sensors Made Using Carbon Nanotubes and Graphite Films on Natural RubberSensors, 2014
- Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxideCarbon, 2007
- Direct mechanical measurement of the tensile strength and elastic modulus of multiwalled carbon nanotubesMaterials Science and Engineering: A, 2002
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992