Chengmei Gui
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chengmei Gui has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Junjun Huang
School of Energy Materials and Chemical Engineering, Hefei University, Hefei 230601, China
11 shared publications Zhenming Chen
School of Energy Materials and Chemical Engineering, Hefei University, Hefei 230601, China
11 shared publicationsDi Sun
School of Energy Materials and Chemical Engineering, Hefei University, Hefei City 230601, China
5 shared publicationsHaodong Ma
School of Energy Materials and Chemical Engineering, Hefei University, Hefei City 230601, China
5 shared publicationsHonglin Li
Anhui Industrial Generic Technology Research Center for New Materials from Coal-Based Solid Wastes
5 shared publicationsJiajia Wan
Guangxi Key Laboratory of Calcium Carbonate Resources Comprehensive Utilization, College of Materials and Chemical Engineering, Hezhou University, Hezhou City, 542899, China
3 shared publications
Latest Publications
- 27 February 2026
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 13 (1)
Unveiling the waveform feature enhancement strategy of a triboelectric signal by exploring a unique one- and two-dimensional composite structural interface
Triboelectric nanogenerator (TENG)-based sensors have emerged as transformative technologies for energy harvesting and self-powered sensing. Enhancing the waveform characteristics of triboelectric signals is crucial for improving sensing accuracy. Here, we report a TENG-based vibration sensor employing a polymer-encapsulated metal conductor, guided by a unique one- and two-dimensional composite structural interface to enrich signal waveform features. An ethyl cellulose-modified electroless copper-plated nonwoven substrate was used as the inner electrode, subsequently encapsulated in a low-modulus polydimethylsiloxane (PDMS) matrix to fabricate the device. Upon contact with external stimuli, including vibration waves and diverse material surfaces, the overlap of electron clouds at the electrode/PDMS interface reduces the energy barrier, facilitating electron transfer and generating triboelectric signals. Notably, the multidimensional electrode structure produces signals with richer, subtle features, which can be effectively captured by machine learning algorithms to extract detailed information about the stimuli. This work provides an innovative approach for enhancing triboelectric waveform features and demonstrates a high-accuracy tactile sensor with potential for advancing sustainable and intelligent sensing technologies.
- 27 February 2026
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 13 (1)
Unveiling the waveform feature enhancement strategy of a triboelectric signal by exploring a unique one- and two-dimensional composite structural interface
Triboelectric nanogenerator (TENG)-based sensors have emerged as transformative technologies for energy harvesting and self-powered sensing. Enhancing the waveform characteristics of triboelectric signals is crucial for improving sensing accuracy. Here, we report a TENG-based vibration sensor employing a polymer-encapsulated metal conductor, guided by a unique one- and two-dimensional composite structural interface to enrich signal waveform features. An ethyl cellulose-modified electroless copper-plated nonwoven substrate was used as the inner electrode, subsequently encapsulated in a low-modulus polydimethylsiloxane (PDMS) matrix to fabricate the device. Upon contact with external stimuli, including vibration waves and diverse material surfaces, the overlap of electron clouds at the electrode/PDMS interface reduces the energy barrier, facilitating electron transfer and generating triboelectric signals. Notably, the multidimensional electrode structure produces signals with richer, subtle features, which can be effectively captured by machine learning algorithms to extract detailed information about the stimuli. This work provides an innovative approach for enhancing triboelectric waveform features and demonstrates a high-accuracy tactile sensor with potential for advancing sustainable and intelligent sensing technologies.
- 22 December 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (1) , 1450-1462
Enhancing the Roughness Recognition Accuracy of Tactile Sensors Based on the Triboelectric Material Surface Structure Management Strategy
Currently, triboelectric nanogenerator (TENG)-based tactile sensors demonstrate considerable effectiveness in material type recognition. However, challenges remain regarding the stability of triboelectric materials and low precision when applied to the recognition of material surface roughness. To address these issues, the present study focuses on the preparation of a template of unconventional micro-nanostructure using recycled polylactic acid (PLA) materials. By meticulously designing and fabricating polydimethylsiloxane (PDMS)-based elastic triboelectric materials with well-defined concave-convex structures by the template method, a suitable micro-nanoarchitecture was chosen to enhance the triboelectric effect and improve sensing accuracy. To be precise, enhancing the roughness recognition accuracy of the tactile sensor through a triboelectric material surface structure management strategy was developed. Among the various concave-convex structures, the TENG device with a specific micro-nanostructure surface (roughness: 0.18 μm and maximum depth: 0.78 μm) exhibited the highest output voltage and charge density, reaching values of 4.9 V and 3.9 μC/m2, respectively. More importantly, the mapping relationship between the strain field distribution (or signal waveform characteristics) and the surface characteristics of the contacting material becomes clearer and more accurate with the establishment of special micro-nanostructures on the triboelectric material surface, thereby improving the recognition accuracy of the material surface roughness. Hence, by integrating deep machine learning and triboelectric effects, and combining signal collecting, data processing, and display modules, a material sensing system integrating high-precision TENG sensors was developed. It can monitor the different roughnesses of the object surface in real time in the natural environment, approximately 93% (0.027 mm), 78% (0.10 mm), and 82% (0.12 mm). Finally, this strategy can provide robots with richer and more accurate sensing capabilities.
- 22 December 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (1) , 1450-1462
Enhancing the Roughness Recognition Accuracy of Tactile Sensors Based on the Triboelectric Material Surface Structure Management Strategy
Currently, triboelectric nanogenerator (TENG)-based tactile sensors demonstrate considerable effectiveness in material type recognition. However, challenges remain regarding the stability of triboelectric materials and low precision when applied to the recognition of material surface roughness. To address these issues, the present study focuses on the preparation of a template of unconventional micro-nanostructure using recycled polylactic acid (PLA) materials. By meticulously designing and fabricating polydimethylsiloxane (PDMS)-based elastic triboelectric materials with well-defined concave-convex structures by the template method, a suitable micro-nanoarchitecture was chosen to enhance the triboelectric effect and improve sensing accuracy. To be precise, enhancing the roughness recognition accuracy of the tactile sensor through a triboelectric material surface structure management strategy was developed. Among the various concave-convex structures, the TENG device with a specific micro-nanostructure surface (roughness: 0.18 μm and maximum depth: 0.78 μm) exhibited the highest output voltage and charge density, reaching values of 4.9 V and 3.9 μC/m2, respectively. More importantly, the mapping relationship between the strain field distribution (or signal waveform characteristics) and the surface characteristics of the contacting material becomes clearer and more accurate with the establishment of special micro-nanostructures on the triboelectric material surface, thereby improving the recognition accuracy of the material surface roughness. Hence, by integrating deep machine learning and triboelectric effects, and combining signal collecting, data processing, and display modules, a material sensing system integrating high-precision TENG sensors was developed. It can monitor the different roughnesses of the object surface in real time in the natural environment, approximately 93% (0.027 mm), 78% (0.10 mm), and 82% (0.12 mm). Finally, this strategy can provide robots with richer and more accurate sensing capabilities.
- 1 April 2025
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 12 (12) , 4413-4425
A high recognition accuracy tactile sensor based on boron nitride nanosheets/epoxy composites for material identification
Tactile sensors based on triboelectric nanogenerators (TENGs) showed great potential for self-driven sensing in material identification. The existing TENG devices used strongly electrophilic materials as friction layers. For test materials with electrophilicity, their output signals are weak and difficult to efficiently recognize. Here, a TENG-based sensor with boron nitride nanosheets/waterborne epoxy (BNNSs/WEP) composites as the friction layer was proposed for improving the accuracy of identifying negative charged materials. During the process of contact friction with negative charged objects, the as-fabricated TENG device displayed excellent output performance, with a maximum output voltage of 2.7 V and a charge density of 88.32 nC m−2. Combining deep machine learning and the friction electric effect, we developed a material recognition system for TENG sensors with integrated fatigue testing, data processing, and display modules. Following the training of the convolutional neural network (CNN) model with friction electrical signals generated by TENGs, the model demonstrated high accuracy in recognizing eight different materials, with a confusion matrix accuracy of 100%. Then, a sensor was developed for real-time device monitoring, with recognition accuracy of 100%, 100%, 55% and 49% for four kinds of materials. This work will further facilitate the development of a material perception system in the machine intelligence field.
- 1 April 2025
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 12 (12) , 4413-4425
A high recognition accuracy tactile sensor based on boron nitride nanosheets/epoxy composites for material identification
Tactile sensors based on triboelectric nanogenerators (TENGs) showed great potential for self-driven sensing in material identification. The existing TENG devices used strongly electrophilic materials as friction layers. For test materials with electrophilicity, their output signals are weak and difficult to efficiently recognize. Here, a TENG-based sensor with boron nitride nanosheets/waterborne epoxy (BNNSs/WEP) composites as the friction layer was proposed for improving the accuracy of identifying negative charged materials. During the process of contact friction with negative charged objects, the as-fabricated TENG device displayed excellent output performance, with a maximum output voltage of 2.7 V and a charge density of 88.32 nC m−2. Combining deep machine learning and the friction electric effect, we developed a material recognition system for TENG sensors with integrated fatigue testing, data processing, and display modules. Following the training of the convolutional neural network (CNN) model with friction electrical signals generated by TENGs, the model demonstrated high accuracy in recognizing eight different materials, with a confusion matrix accuracy of 100%. Then, a sensor was developed for real-time device monitoring, with recognition accuracy of 100%, 100%, 55% and 49% for four kinds of materials. This work will further facilitate the development of a material perception system in the machine intelligence field.
- 7 November 2024
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 9 (11) , 5945-5954
Hydrophobic and Elastic Structural Triboelectric Materials Enabled by Template Method toward Real-Time Material Recognition
- 7 November 2024
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 9 (11) , 5945-5954
Hydrophobic and Elastic Structural Triboelectric Materials Enabled by Template Method toward Real-Time Material Recognition
- 22 July 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (31) , 16283-16290
Electroless Copper Plating on a Cotton Surface: Effect of Metal Ion Ligand Stability Constant on Reduction Deposition
Electroless plating facilitates the metallization of nonconductive substrate surfaces, and of note, the precise control of the bath stability constant influences the deposition process of metal particles. In this paper, trisodium citrate, potassium sodium tartrate, nitrogen triacetic acid, thiourea, and ethylenediamine tetraacetic acid disodium were selected as coordination agents, and the effect of the metal ion ligand stability constant on the reduction deposition was studied. Coordination bonds can be established between the Cu2+ and O/N/S particles in the ligand because paired electrons in O/N/S hybrid orbitals tend to occupy empty Cu2+ hybrid orbitals and establish coordination bonds. More importantly, the copper-potassium sodium tartrate ligand exhibits the lowest stability constant and lowest reduction barrier. As an exception, a consecutive Cu-plated coating with an excellent crystallinity property was deposited on the cotton surface when potassium sodium tartrate was used as the coordination agent in the plating solution. The deposition amounts are 55.2% and 74.1% after 1 and 4 h of electroless copper plating, respectively. The surface resistivity of Cu-plated cotton is 0.38 Ω/cm2, and additionally, the surface resistivity ratio before and after 1000 cycles fluctuated between 0.9 and 1.1, indicating that the Cu-plated cotton exhibits outstanding flexibility. In this paper, the deposition rate can be optimized by adjusting the copper particle ligand stability constant in the plating solution, aiming to achieve optimal results.
- 22 July 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (31) , 16283-16290
Electroless Copper Plating on a Cotton Surface: Effect of Metal Ion Ligand Stability Constant on Reduction Deposition
Electroless plating facilitates the metallization of nonconductive substrate surfaces, and of note, the precise control of the bath stability constant influences the deposition process of metal particles. In this paper, trisodium citrate, potassium sodium tartrate, nitrogen triacetic acid, thiourea, and ethylenediamine tetraacetic acid disodium were selected as coordination agents, and the effect of the metal ion ligand stability constant on the reduction deposition was studied. Coordination bonds can be established between the Cu2+ and O/N/S particles in the ligand because paired electrons in O/N/S hybrid orbitals tend to occupy empty Cu2+ hybrid orbitals and establish coordination bonds. More importantly, the copper-potassium sodium tartrate ligand exhibits the lowest stability constant and lowest reduction barrier. As an exception, a consecutive Cu-plated coating with an excellent crystallinity property was deposited on the cotton surface when potassium sodium tartrate was used as the coordination agent in the plating solution. The deposition amounts are 55.2% and 74.1% after 1 and 4 h of electroless copper plating, respectively. The surface resistivity of Cu-plated cotton is 0.38 Ω/cm2, and additionally, the surface resistivity ratio before and after 1000 cycles fluctuated between 0.9 and 1.1, indicating that the Cu-plated cotton exhibits outstanding flexibility. In this paper, the deposition rate can be optimized by adjusting the copper particle ligand stability constant in the plating solution, aiming to achieve optimal results.
- 13 February 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (8) , 4022-4032
Fabrication of Electrode Material for Textile-Based Triboelectric Nanogenerators: Research of the Relationship between Output Performance and Dielectric Material Strain
In this work, a textile-based triboelectric nanogenerator (TENG) device was developed through electroless plating technology to prepare electrode material. Hydrophilic groups on the fiber surface are able to absorb Ag+, which could play a role in the center of a catalyst to reduce Cu2+ to fabricate Cu-coated cotton toward the fabrication of TENG electrode material. The TENG device established admirable performance and good stabilization, and a maximum voltage at 9.6 V was detected when the stress and strain on the polydimethylsiloxane layer are 82.6 kPa and 5.8%, respectively. In addition, the relationships among device properties and strain/thickness of dielectric materials have been explored in depth as well. The output voltage of the device increases gradually with the enhancement of dielectric strain and stress. As expected, the TENG as-fabricated device was installed to various physical behaviors to illustrate the harvesting of power of knee-jerk movements.
- 13 February 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (8) , 4022-4032
Fabrication of Electrode Material for Textile-Based Triboelectric Nanogenerators: Research of the Relationship between Output Performance and Dielectric Material Strain
In this work, a textile-based triboelectric nanogenerator (TENG) device was developed through electroless plating technology to prepare electrode material. Hydrophilic groups on the fiber surface are able to absorb Ag+, which could play a role in the center of a catalyst to reduce Cu2+ to fabricate Cu-coated cotton toward the fabrication of TENG electrode material. The TENG device established admirable performance and good stabilization, and a maximum voltage at 9.6 V was detected when the stress and strain on the polydimethylsiloxane layer are 82.6 kPa and 5.8%, respectively. In addition, the relationships among device properties and strain/thickness of dielectric materials have been explored in depth as well. The output voltage of the device increases gradually with the enhancement of dielectric strain and stress. As expected, the TENG as-fabricated device was installed to various physical behaviors to illustrate the harvesting of power of knee-jerk movements.
- 2 August 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 11 (34) , 18441-18453
Fabrication of triboelectric nanogenerators with multiple strain mechanisms for high-accuracy material and gesture recognition
Textile-based triboelectric nanogenerators (T-TENGs) have great potential in new-generation tactile sensors because their output signal is determined by the specific charge interaction between the target and triboelectric material. However, gesture recognition by existing T-TENG tactile sensors is very challenging because the electron affinity and polarity of the volunteer skin are similar. This study proposes a new structural sensor that integrates a Ni particle-encapsulated carbon tube (Ni@C tube) with polydimethylsiloxane (PDMS) by means of multiple strain mechanisms for improving recognition accuracy using a signal superposition technique. Interestingly, dynamic strain from multiple sources, i.e., PDMS layer strain (1.24–2.47 kPa), Ni@C tube crack (2.47–5.56 kPa), PDMS layer further strain (5.56–52.97 kPa), and Ni@C tube slip laterally (52.97–139.05 kPa), was established in the PDMS-coated Ni@C tube. In addition, the output signal of the as-fabricated T-TENG device was a combination of output signals from the PDMS/Ni@C tube and PDMS/contact object devices, which could fully reflect the stress field caused by the contact material pressing the surface and the surface characteristics, promoting the deep learning algorithm to be able to extract more hidden features of the identified materials. By integrating convolutional neural network (CNN) analysis based on the voltage signals of the T-TENG device, we explored a strategy that could enable the as-fabricated device to recognize 6 gestures with 99.3% recognition accuracy and 8 different materials with 99.8% recognition accuracy in the natural environment.
- 2 August 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 11 (34) , 18441-18453
Fabrication of triboelectric nanogenerators with multiple strain mechanisms for high-accuracy material and gesture recognition
Textile-based triboelectric nanogenerators (T-TENGs) have great potential in new-generation tactile sensors because their output signal is determined by the specific charge interaction between the target and triboelectric material. However, gesture recognition by existing T-TENG tactile sensors is very challenging because the electron affinity and polarity of the volunteer skin are similar. This study proposes a new structural sensor that integrates a Ni particle-encapsulated carbon tube (Ni@C tube) with polydimethylsiloxane (PDMS) by means of multiple strain mechanisms for improving recognition accuracy using a signal superposition technique. Interestingly, dynamic strain from multiple sources, i.e., PDMS layer strain (1.24–2.47 kPa), Ni@C tube crack (2.47–5.56 kPa), PDMS layer further strain (5.56–52.97 kPa), and Ni@C tube slip laterally (52.97–139.05 kPa), was established in the PDMS-coated Ni@C tube. In addition, the output signal of the as-fabricated T-TENG device was a combination of output signals from the PDMS/Ni@C tube and PDMS/contact object devices, which could fully reflect the stress field caused by the contact material pressing the surface and the surface characteristics, promoting the deep learning algorithm to be able to extract more hidden features of the identified materials. By integrating convolutional neural network (CNN) analysis based on the voltage signals of the T-TENG device, we explored a strategy that could enable the as-fabricated device to recognize 6 gestures with 99.3% recognition accuracy and 8 different materials with 99.8% recognition accuracy in the natural environment.
- 28 June 2023
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 10 (9) , 3840-3853
Fabrication of a textile-based triboelectric nanogenerator toward high-efficiency energy harvesting and material recognition
Textile-based triboelectric nanogenerator (T-TENG) devices, particularly, narrow-gap mode, have been conceived and developed for obtaining energy harvesting and tactile sensing devices unaffected by the external environment.
- 28 June 2023
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 10 (9) , 3840-3853
Fabrication of a textile-based triboelectric nanogenerator toward high-efficiency energy harvesting and material recognition
Textile-based triboelectric nanogenerator (T-TENG) devices, particularly, narrow-gap mode, have been conceived and developed for obtaining energy harvesting and tactile sensing devices unaffected by the external environment.
- 27 June 2023
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 39 (27) , 9551-9563
Fabrication of Textured Ni-Coated Carbon Tubes for a Flexible Strain Sensor: Effect of the Device Elastic Modulus on Sensor Performance
The exploration of flexible resistive sensors with excellent performance remains a challenge. In this paper, a nickel-coated carbon tube with a textured structure was prepared as a conductive sensitive material and inserted into the poly(dimethylsiloxane) (PDMS) polymer; interestingly, the sensor performance was controlled by the elastic modulus of the matrix resin. The results show that Pd2+ may be adsorbed by the active groups on the surface of a plant fiber as a catalytic center for the reduction of Ni2+. After 300 °C annealing, the inner plant fiber would be carbonized and attached to the outside of the nickel tube; to be precise, the textured Ni-encapsulated C tube was fabricated successfully. It is worth noting that the C tube serves as a layer of support for the external Ni coating, providing sufficient mechanical strength. In addition, resistance sensors with different properties were prepared by controlling the elasticity modulus of the PDMS polymer by introducing different contents of curing agents. The limit uniaxial tensile strain was enhanced from 42 to 49% and sensitivity reduced from 0.2 to 2.0% with the elasticity modulus of the matrix resin increasing from 0.32 to 2.2 MPa. As expected, the sensor is obviously appropriate for the detection of elbow joints, human speaking, and human joints with the reduction of the elasticity modulus of the matrix resin. To be precise, the optimal elastic modulus of the sensor matrix resin would facilitate the improvement of its sensitivity to monitor different human behaviors.
- 27 June 2023
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 39 (27) , 9551-9563
Fabrication of Textured Ni-Coated Carbon Tubes for a Flexible Strain Sensor: Effect of the Device Elastic Modulus on Sensor Performance
The exploration of flexible resistive sensors with excellent performance remains a challenge. In this paper, a nickel-coated carbon tube with a textured structure was prepared as a conductive sensitive material and inserted into the poly(dimethylsiloxane) (PDMS) polymer; interestingly, the sensor performance was controlled by the elastic modulus of the matrix resin. The results show that Pd2+ may be adsorbed by the active groups on the surface of a plant fiber as a catalytic center for the reduction of Ni2+. After 300 °C annealing, the inner plant fiber would be carbonized and attached to the outside of the nickel tube; to be precise, the textured Ni-encapsulated C tube was fabricated successfully. It is worth noting that the C tube serves as a layer of support for the external Ni coating, providing sufficient mechanical strength. In addition, resistance sensors with different properties were prepared by controlling the elasticity modulus of the PDMS polymer by introducing different contents of curing agents. The limit uniaxial tensile strain was enhanced from 42 to 49% and sensitivity reduced from 0.2 to 2.0% with the elasticity modulus of the matrix resin increasing from 0.32 to 2.2 MPa. As expected, the sensor is obviously appropriate for the detection of elbow joints, human speaking, and human joints with the reduction of the elasticity modulus of the matrix resin. To be precise, the optimal elastic modulus of the sensor matrix resin would facilitate the improvement of its sensitivity to monitor different human behaviors.