Crack propagation and fracture in silicon wafers under thermal stress
Open Access
- 7 June 2013
- journal article
- x ray-diffraction-and-imaging
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 46 (4) , 849-855
Abstract
The behaviour of microcracks in silicon during thermal annealing has been studied using in situ X-ray diffraction imaging. Initial cracks are produced with an indenter at the edge of a conventional Si wafer, which was heated under temperature gradients to produce thermal stress. At temperatures where Si is still in the brittle regime, the strain may accumulate if a microcrack is pinned. If a critical value is exceeded either a new or a longer crack will be formed, which results with high probability in wafer breakage. The strain reduces most efficiently by forming (hhl) or (hkl) crack planes of high energy instead of the expected low-energy cleavage planes like {111}. Dangerous cracks, which become active during heat treatment and may shatter the whole wafer, can be identified from diffraction images simply by measuring the geometrical dimensions of the strain-related contrast around the crack tip. Once the plastic regime at higher temperature is reached, strain is reduced by generating dislocation loops and slip bands and no wafer breakage occurs. There is only a small temperature window within which crack propagation is possible during rapid annealing.Keywords
This publication has 21 references indexed in Scilit:
- Slip band distribution in rapid thermally annealed silicon wafersJournal of Applied Physics, 2012
- Real‐time X‐ray diffraction imaging for semiconductor wafer metrology and high temperature in situ experimentsPhysica Status Solidi (a), 2011
- Kinetics of coalescence in liquid aluminium foamsSoft Matter, 2011
- Dislocation dynamics and slip band formation in silicon: In-situ study by X-ray diffraction imagingJournal of Crystal Growth, 2011
- Relationship between wafer edge design and its ultimate mechanical strengthMicroelectronic Engineering, 2010
- Investigation of the Relationship between Whole-Wafer Strength and Control of Its Edge EngineeringJapanese Journal of Applied Physics, 2009
- Strength and sharp contact fracture of siliconJournal of Materials Science, 2006
- Fracture anisotropy in silicon single crystalMaterials Science and Engineering: A, 1999
- The application of elastobirefringence to the study of strain fields and dislocations in III–V compoundsJournal of Applied Physics, 1980
- A double-ellipsoid mirror furnace for zone crystallization experiments in spacelabJournal of Crystal Growth, 1979