Effect of surfactants on performance of electroless plating baths for nickel–ceramic composite membrane fabrication
- 1 February 2012
- journal article
- Published by SAGE Publications in Surface Engineering
- Vol. 28 (1) , 44-48
Abstract
Nickel–ceramic microfiltration membranes were prepared by electroless deposition of nickel on the activated ceramic membrane substrates having a nominal pore size of 275 nm. Two different surfactants, namely sodium dodecyl sulphate (SDS) and cetyltrimethyl ammonium bromide (CTAB), were studied for their ability to alter the performance characteristics of plating baths as well as composite membranes. Parameters evaluated include the bath conversion, plating efficiency, metal film thickness, average pore size of the composite membranes and per cent pore densification. The overall plating rate was found to increase up to 32% with the addition of SDS and 45% with the addition of CTAB. Addition of surfactants not only resulted in increased film thickness (4–5 μm) but also accounted for considerable reduction in average pore size of the composite membrane. CTAB was found to be more effective and efficient than SDS for nickel membrane fabrication.Keywords
This publication has 15 references indexed in Scilit:
- Effect of process parameters on electroless plating and nickel-ceramic composite membrane characteristicsDesalination, 2011
- Electroless deposition of Nickel–cobalt–phosphorus nanoalloySurface Engineering, 2011
- Studies on development of electroless Ni–B bath for corrosion resistance and wear resistance applicationsSurface Engineering, 2010
- Electroless Ni–P coating on W–Cu composite via three different activation processesSurface Engineering, 2009
- Study on morphology and corrosion resistance of electroless Ni–P coatingsSurface Engineering, 2009
- Statistical study of nickel and phosphorus contents in electroless Ni–P coatingsSurface Engineering, 2009
- Study of chemical composition and heat treatment of electroless Ni–B–Tl alloy coating on AISI 316 stainless steelSurface Engineering, 2009
- Fabrication of nickel filter made by uniaxial pressing process for gas purification: Fabrication pressure effectJournal of Membrane Science, 2007
- Permselectivity of a nickel/ceramic composite membrane at elevated temperatures: A new prospect in hydrogen separation?Journal of Membrane Science, 2007
- The study of a new porous nickel support for palladium-based alloy membraneDesalination, 2006