Effect of mixing process on electromagnetic interference shielding effectiveness of nickel/acrylonitrile–butadiene–styrene composites
Authors:
- 22 April 2005
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 97 (1) , 128-135
Abstract
This article reports the effect of the mixing process on the electromagnetic interference (EMI) shielding effectiveness of nickel/acrylonitrile–butadiene–styrene (ABS) composites. Nickel in either powder or filament form was used as the filler material. It was mixed with ABS by two mixing processes: one was the Brabender‐mixing method, in which nickel was mixed in the polymer melt by a strong shear at high temperatures, and the other was a simple dry mixing method performed in a centrifugal ball mill. Our results showed that the dry‐mixing method could produce EMI shielding effectiveness of 36 dB at the 3 vol % nickel filaments level. In contrast, we need 20 vol % nickel powder to exhibit some shielding effectiveness for the Brabender method. After the nondestructive X‐ray examination and four‐point probe resistivity measurements, we concluded that better EMI shielding effectiveness could be achieved when the mixing method provided a state of uniformity on the macroscale, but not on the microscale. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 128–135, 2005Keywords
This publication has 7 references indexed in Scilit:
- Electromagnetic interference shielding effectiveness and mechanical sliding behavior for electroless nickel/phosphorous–poly(tetrafluoroethylene) codeposition on carbon fiber/acrylonitrile–butadiene–styrene compositesJournal of Applied Polymer Science, 2002
- EMI shielding effectiveness of metal-coated carbon fiber-reinforced ABS compositesMaterials Science and Engineering: A, 2001
- Electromagnetic interference shielding effectiveness of ethylene vinyl acetate based conductive composites containing carbon fillersJournal of Applied Polymer Science, 2001
- The EMI shielding effectiveness of PC/ABS/nickel-coated-carbon-fibre compositesEuropean Polymer Journal, 2000
- Submicron diameter nickel filaments and their polymer-matrix compositesJournal of Materials Science, 2000
- Shielding: quantifying the shielding requirements for portable electronic design and providing new solutions by using a combination of materials and designMaterials & Design (1980-2015), 1999
- Electrical and shielding properties of ABS resin filled with nickel-coated carbon fibersComposites Science and Technology, 1996