Influence of Substrate Temperature on Microstructure of Zirconium Silicon Nitride Thin Films Deposited by Reactive Magnetron Sputtering
Open Access
- 1 January 2023
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 26, e20230235
Abstract
Zr-Si-N thin films were co-deposited by reactive magnetron sputtering to verify the influence of silicon content (1.6 and 8.0 at. % Si) and substrate temperature (room temperature and heated to 973 K) on structure, morphology, chemical bonds and hardness. GAXRD shows a change in grain orientation from (111) to (200) due substrate heating for sample Zr0.984Si0.016N, furthermore, it was not possible to identify any silicon compounds in all deposited samples. SEM-FEG images show greater roughness and surface clusters for sample Zr0.920Si0.080N due to the heat applied on the substrate, with Si3N4 decomposition, influencing thin film hardness. XPS analyses of Si 2p photoelectronic region shows only Si3N4 presence in all samples, proving, in conjunction with other characterization results, the non-formation of substitutional or interstitial solid solution, regardless of substrate heating or silicon content added to ZrN matrix.Keywords
This publication has 27 references indexed in Scilit:
- Carbon occupancy of interstitial sites in vanadium carbide films deposited by direct current reactive magnetron sputteringThin Solid Films, 2009
- Effect of crystallographic orientation of nanocrystalline TiN on structural, electrical and mechanical properties of TiN/NiTi thin filmsJournal of Alloys and Compounds, 2009
- Structure, morphology and electrical properties of sputtered Zr–Si–N thin films: From solid solution to nanocompositeSurface and Coatings Technology, 2006
- Influence of silicon on the microstructure and mechanical properties of Zr–Si–N composite filmsApplied Surface Science, 2006
- Stabilisation of tetragonal zirconia in oxidised ZrSiN nanocomposite coatingsApplied Surface Science, 2004
- The effects of Si addition on the structure and mechanical properties of ZrN thin films deposited by an r.f. reactive sputtering methodSurface and Coatings Technology, 2001
- Initial oxidation of zirconium and Zircaloy-2 with oxygen and water vapor at room temperatureJournal of Nuclear Materials, 1996
- Characterization of a boro-silicon oxynitride prepared by thermal nitridation of a polyborosiloxaneJournal of Alloys and Compounds, 1996
- Preparation of nitride films by Ar+-ion bombardment of metals in nitrogen atmosphereJournal of Vacuum Science & Technology A, 1988
- High Rate Thick Film GrowthAnnual Review of Materials Science, 1977