Daniel Angel Ramirez Fernandez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Daniel Angel Ramirez Fernandez has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Eduardo Kirinus Tentardini
Universidade Federal de Sergipe, Brasil
9 shared publications - André Romão Terto
Universidade Federal de Sergipe, Brasil
5 shared publications - Vagner Fontes Dória Soares
Universidade Federal de Sergipe, Brasil
5 shared publications - Roberto Hübler
Polytechnic School, PUCRS
4 shared publications F.M.T. Mendes
Instituto Nacional de Tecnologia, Brasil
3 shared publications- Iago Lemos Dias
Universidade Federal de Sergipe, Brasil
3 shared publications
Latest Publications
- Open Access
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 26, e20230235
Influence of Substrate Temperature on Microstructure of Zirconium Silicon Nitride Thin Films Deposited by Reactive Magnetron Sputtering
Zr-Si-N thin films were co-deposited by reactive magnetron sputtering to verify the influence of silicon content (1.6 and 8.0 at. % Si) and substrate temperature (room temperature and heated to 973 K) on structure, morphology, chemical bonds and hardness. GAXRD shows a change in grain orientation from (111) to (200) due substrate heating for sample Zr0.984Si0.016N, furthermore, it was not possible to identify any silicon compounds in all deposited samples. SEM-FEG images show greater roughness and surface clusters for sample Zr0.920Si0.080N due to the heat applied on the substrate, with Si3N4 decomposition, influencing thin film hardness. XPS analyses of Si 2p photoelectronic region shows only Si3N4 presence in all samples, proving, in conjunction with other characterization results, the non-formation of substitutional or interstitial solid solution, regardless of substrate heating or silicon content added to ZrN matrix.
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 26, e20230235
Open AccessInfluence of Substrate Temperature on Microstructure of Zirconium Silicon Nitride Thin Films Deposited by Reactive Magnetron Sputtering
Zr-Si-N thin films were co-deposited by reactive magnetron sputtering to verify the influence of silicon content (1.6 and 8.0 at. % Si) and substrate temperature (room temperature and heated to 973 K) on structure, morphology, chemical bonds and hardness. GAXRD shows a change in grain orientation from (111) to (200) due substrate heating for sample Zr0.984Si0.016N, furthermore, it was not possible to identify any silicon compounds in all deposited samples. SEM-FEG images show greater roughness and surface clusters for sample Zr0.920Si0.080N due to the heat applied on the substrate, with Si3N4 decomposition, influencing thin film hardness. XPS analyses of Si 2p photoelectronic region shows only Si3N4 presence in all samples, proving, in conjunction with other characterization results, the non-formation of substitutional or interstitial solid solution, regardless of substrate heating or silicon content added to ZrN matrix.
- 2 September 2022
- Published by SAGE Publications in Surface Engineering
- Vol. 38 (7-9) , 761-768
Structural investigation of ZrN+Si3N4 thin films co-deposited by magnetron sputtering
- 2 September 2022
- Published by SAGE Publications in Surface Engineering
- Vol. 38 (7-9) , 761-768
Structural investigation of ZrN+Si3N4 thin films co-deposited by magnetron sputtering
- Open Access
- 1 January 2021
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 26 (4)
Influence of zirconium addition on microstructure, hardness and oxidation resistance of tantalum nitride thin films
- 1 January 2021
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 26 (4)
Open AccessInfluence of zirconium addition on microstructure, hardness and oxidation resistance of tantalum nitride thin films
- Open Access
- 1 January 2021
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 24 (1)
Structure, mechanical properties and oxidation resistance of iso and non-iso architected TiN/Cr multilayers coatings deposited by magnetron sputtering
Iso and non-iso architected TiN/Cr multilayers with constant composition were deposited by balanced magnetron sputtering aiming to investigate the influence of different architectures over coatings structures and properties. Glow discharge optical emission spectroscopy analyses were used to determine in-depth constituents and suggested that no diffusion of elements occurred between layers in room temperature. Field emission gun scanning electron microscopy analyses showed that all multilayers presented sharp interfaces and low porosity microstructures, with column-like grain growth influenced by layer sizes. Glancing angle X-ray diffraction analyses showed that multilayers consist of polycrystalline α-Cr and δ-TiN phases with a main peak in Cr(110) plane. The overlapping of TiN onto metallic layers led to the suppression of growth in the TiN(111) plane, although TiN layers thicker than 50 nm demonstrated a growth in plane TiN(200). Nanoindentation tests registered equal hardness values for all multilayers of around 16.2 GPa, on the other hand, a tendency to improve hardness has been identified for hierarchical multilayer. Oxidation tests revealed that architectures with thicker TiN top layers presented an improved oxidation resistance up to 600 ºC, probably due to growth in more compact TiN(200) plane. However, TiN/Cr coatings did not resist integrally to oxidation tests at 750 ºC.
- 1 January 2021
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 24 (1)
Open AccessStructure, mechanical properties and oxidation resistance of iso and non-iso architected TiN/Cr multilayers coatings deposited by magnetron sputtering
Iso and non-iso architected TiN/Cr multilayers with constant composition were deposited by balanced magnetron sputtering aiming to investigate the influence of different architectures over coatings structures and properties. Glow discharge optical emission spectroscopy analyses were used to determine in-depth constituents and suggested that no diffusion of elements occurred between layers in room temperature. Field emission gun scanning electron microscopy analyses showed that all multilayers presented sharp interfaces and low porosity microstructures, with column-like grain growth influenced by layer sizes. Glancing angle X-ray diffraction analyses showed that multilayers consist of polycrystalline α-Cr and δ-TiN phases with a main peak in Cr(110) plane. The overlapping of TiN onto metallic layers led to the suppression of growth in the TiN(111) plane, although TiN layers thicker than 50 nm demonstrated a growth in plane TiN(200). Nanoindentation tests registered equal hardness values for all multilayers of around 16.2 GPa, on the other hand, a tendency to improve hardness has been identified for hierarchical multilayer. Oxidation tests revealed that architectures with thicker TiN top layers presented an improved oxidation resistance up to 600 ºC, probably due to growth in more compact TiN(200) plane. However, TiN/Cr coatings did not resist integrally to oxidation tests at 750 ºC.
- 1 November 2019
- Published by Elsevier in Ceramics International
- Vol. 45 (16) , 19918-19924
Influence of WS2 content on high temperature wear performance of magnetron sputtered TiN-WSx thin films
- 1 November 2019
- Published by Elsevier in Ceramics International
- Vol. 45 (16) , 19918-19924
Influence of WS2 content on high temperature wear performance of magnetron sputtered TiN-WSx thin films
- 1 August 2019
- Published by Elsevier in Applied Surface Science
- Vol. 485, 490-495
Structure and high temperature oxidation of Zr(1-x)Mo(x)N thin films deposited by reactive magnetron sputtering
- 1 August 2019
- Published by Elsevier in Applied Surface Science
- Vol. 485, 490-495
Structure and high temperature oxidation of Zr(1-x)Mo(x)N thin films deposited by reactive magnetron sputtering
- Open Access
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 22 (5)
Interrelation Among Morphology, Mechanical Properties and Oxidation Behavior of NbxAlyNz Thin Films
NbxAlyNz thin films were deposited by magnetron sputtering reactive technique with (y/x+y) ratio varying from 0 to 0.4, in order to maintain aluminum atoms inside NbN matrix in solid solution. GAXRD analyses revealed that the crystalline phase obtained for NbxAlyNz thin films was B1-NbN with a lattice constant shrinkage as Al concentration at these coatings was increased. Due to similarity in electro negativity values between Nb and Al, XPS analyses could not verify pronounced changes among as deposited NbxAlyNz coatings. The average hardness values evidenced that solid solution strengthening mechanism did not increase hardness significantly. The oxidation resistance increased with Al content and no oxide phases were registered by GAXRD analyses for coating with more aluminum added. However, SEM images revealed bubbles after oxidation at high temperatures for all samples.
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 22 (5)
Open AccessInterrelation Among Morphology, Mechanical Properties and Oxidation Behavior of NbxAlyNz Thin Films
NbxAlyNz thin films were deposited by magnetron sputtering reactive technique with (y/x+y) ratio varying from 0 to 0.4, in order to maintain aluminum atoms inside NbN matrix in solid solution. GAXRD analyses revealed that the crystalline phase obtained for NbxAlyNz thin films was B1-NbN with a lattice constant shrinkage as Al concentration at these coatings was increased. Due to similarity in electro negativity values between Nb and Al, XPS analyses could not verify pronounced changes among as deposited NbxAlyNz coatings. The average hardness values evidenced that solid solution strengthening mechanism did not increase hardness significantly. The oxidation resistance increased with Al content and no oxide phases were registered by GAXRD analyses for coating with more aluminum added. However, SEM images revealed bubbles after oxidation at high temperatures for all samples.
- 1 November 2018
- Published by Elsevier in Surface and Coatings Technology
- Vol. 353, 355-363
Investigation of microstructure and properties of magnetron sputtered Zr-Si-N thin films with different Si content
- 1 November 2018
- Published by Elsevier in Surface and Coatings Technology
- Vol. 353, 355-363
Investigation of microstructure and properties of magnetron sputtered Zr-Si-N thin films with different Si content
- 1 June 2011
- Published by Elsevier in Materials Science and Engineering: A
- Vol. 528 (16-17) , 5379-5386
Open-cellular copper structures fabricated by additive manufacturing using electron beam melting
- 1 June 2011
- Published by Elsevier in Materials Science and Engineering: A
- Vol. 528 (16-17) , 5379-5386
Open-cellular copper structures fabricated by additive manufacturing using electron beam melting