Abstract
The potential blast mitigation effect of natural vegetation was studied through small-scale explosions with miniature trees that had iron trunks and branches and porous nylon leaves. The shock wave reflection and transmission behaviors were tested via shock tube experiments, and the interaction behavior between shock waves and the miniature trees was used to determine the proper numerical method for modeling the miniature trees. The possibility of blast mitigation was examined through explosion experiments involving miniature trees placed around an explosive. The parameters of the miniature trees were the tree height, total mass, and plant density. The experiments showed that increasing these values had a substantial impact on blast mitigation efficiency. Numerical simulations were then conducted using a two-phase Eulerian–Eulerian model. The miniature trees were modeled as uniformly distributed blocks of porous nylon with drag force and convective heat transfer models. The obtained blast mitigation effect of the miniature trees agreed with the experimental data. Drag force caused the reflection and transmission of the shock wave, resulting in a nonuniform distribution of the blast mitigation effect behind the porous nylon. Nonetheless, this spatial distribution disappeared after the blast wave sufficiently propagated. The blast mitigation effect was determined by the absorption of the energy released by the explosive. Finally, a parametric study on the plant density, total mass, and location of the porous nylon was conducted to formulate an index that reasonably estimates the blast mitigation effect from the initial configuration of the porous nylon leaves.

This publication has 37 references indexed in Scilit: