Investigation of Flow Channel Configurations in Liquid-Cooled Plates for Electric Vehicle Battery Thermal Management
Open Access
- 19 September 2025
- journal article
- research article
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 16 (9) , 536
Abstract
Mitigating heat generation in electric vehicle (EV) batteries is crucial for safety, operational efficiency, and battery lifespan. Liquid-cooled cold plates are widely used; however, comparative studies of channel geometries are often hindered by inconsistent experimental conditions. This study systematically compares six cold plate configurations under identical cross-sectional areas and uniform thermal boundary conditions. These controls isolate the effect of geometry on performance. Computational fluid dynamics (CFDs) was used to evaluate six configurations, derived from three main channel layouts (serpentine with eight U-turns, serpentine with six U-turns, and elliptical) and two cross-sectional shapes (circular and square). The serpentine square-tube design with eight U-turns exhibited the lowest thermal resistance (0.0159 K/W). The circular-tube variant achieved the most uniform temperature distribution (TUI > 0.53). The six U-turn circular-tube configuration demonstrated the lowest pressure drop (11.7 kPa). The results indicate that no single design optimizes all performance metrics, highlighting trade-offs between cooling effectiveness, temperature uniformity, and hydraulic efficiency. By isolating geometric variables, this study offers targeted design recommendations for engineers developing battery thermal management systems (BTMS).Keywords
Funding Information
- Direktorat Penelitian dan Pengabdian kepada Masyarakat, Direktorat Jenderal Riset dan Pengembangan Kementerian Pendidikan Tinggi, Sains, dan Teknologi (028/C3/DT.05.00/PL/2025)
This publication has 59 references indexed in Scilit:
- An improved hybrid thermal management system for prismatic Li-ion batteries integrated with mini-channel and phase change materialsApplied Energy, 2023
- A comparative study between air cooling and liquid cooling thermal management systems for a high-energy lithium-ion battery moduleApplied Thermal Engineering, 2021
- A new design for hybrid cooling of Li-ion battery pack utilizing PCM and mini channel cold platesApplied Thermal Engineering, 2021
- Performance evaluation of hybrid oscillating heat pipe with carbon nanotube nanofluids for electric vehicle battery coolingApplied Thermal Engineering, 2021
- Experiment investigation on a novel composite silica gel plate coupled with liquid-cooling system for square battery thermal managementApplied Thermal Engineering, 2021
- Heat pipe air-cooled thermal management system for lithium-ion batteries: High power applicationsApplied Thermal Engineering, 2021
- A new concept of thermal management system in Li-ion battery using air cooling and heat pipe for electric vehiclesApplied Thermal Engineering, 2020
- Thermal management of modern electric vehicle battery systems (MEVBS)Journal of Thermal Analysis and Calorimetry, 2020
- Effects of different coolants and cooling strategies on the cooling performance of the power lithium ion battery system: A reviewApplied Thermal Engineering, 2018
- Study of relationship between temperature and thermal energy, operating conditions as well as environmental factors in large-scale lithium-ion batteriesInternational Journal of Energy Research, 2014