Analysis of Visible-Light Image and Flashover Voltage on the Cap-and-Pin Insulator With Fan-Shaped Pollution Distribution
Open Access
- 1 January 2026
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 59001-59021
Abstract
Previous models have examined the relationship between insulator pollution level and flashover voltage, as well as between pollution levels and image-based features. This study investigated the potential correlation between visible-light images and flashover voltage. Porcelain cap-and-pin insulators were contaminated using a modified fan-shaped pollution distribution technique with a low-volume medium-pressure spray gun. Four pollution levels were produced by varying the ash–salt concentration (0.02–0.12 g/mL) and the number of spray gun trigger actuation (2-12). After ultrasonic humidification at 90% relative humidity for 90 min, the AC flashover tests were repeated at each pollution level until ten flashover voltages were obtained. Insulator images were captured under controlled conditions, including illumination (6,000 lm, 6,500 K), exposure parameters (ISO 500, f/16, 1/10 s), imaging geometry (1.3 m distance, 11.5° downward tilt, maximum optical zoom), and in-camera sRGB color space. Image processing involved selecting the fan-shaped area, cropping, background removal, conversion to RGB and HSV stacks, and histogram computation. Pearson’s correlation analysis showed that the histogram peak displacement between the dry and wet conditions of the pollutant layer was the most representative image feature with respect to flashover voltage. The RGB histogram peak displacement exhibited a higher correlation level than HSV, with the red component showing the greatest correlation coefficient (0.82). Furthermore, multivariable linear regression based on RGB histogram peak displacement yielded a coefficient of determination of 0.915. These results indicate that visible-light images can serve as non-contact predictors of the insulator pollution level and flashover voltage.Keywords
Funding Information
- Indonesia Endowment Fund for Education (LPDP) Doctoral Scholarship, Ministry of Finance, Republic of Indonesia
- Universitas Gadjah Mada
This publication has 46 references indexed in Scilit:
- Measurement and evaluation of the flashover voltage on polluted cap and pin insulator: An experimental and theoretical studyElectric Power Systems Research, 2024
- Partial discharge characteristics from polymer insulator under various contaminantElectric Power Systems Research, 2024
- Artificial Neural Network Approach for Prediction of Leakage Current of polymeric insulator under Non-Uniform Fan-shaped ContaminationElectric Power Systems Research, 2022
- Flashover voltage of porcelain insulator under various pollution distributions: Experiment and modelingElectric Power Systems Research, 2022
- Color appearance shifts depending on surface roughness, illuminants, and physical colorsScientific Reports, 2022
- Digital Image Processing2022
- Computer Vision2022
- AC flashover dynamic model suggestion and insulation level selection under fan-shaped pollutionInternational Journal of Electrical Power & Energy Systems, 2022
- Experimental investigation on composite insulators AC flashover performance with fan-shaped non-uniform pollution under electro-thermal stressInternational Journal of Electrical Power & Energy Systems, 2020
- Investigation and analysis of AC flashover voltage of SiR insulators under longitudinal and fan-shaped non-uniform pollutionsInternational Journal of Electrical Power & Energy Systems, 2019