Investigations on wetting and structural behavior using CaF2-SiO2-CaO-22.5%TiO2 SMAW electrode coating for AUSC applications
- 2 March 2023
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
- Vol. 237 (8) , 1861-1873
Abstract
This study investigates the structural behavior and high-temperature wettability of a CaF2-SiO2-CaO-22.5%TiO2 shielded metal arc welding electrode coating for advanced ultra-supercritical power plant applications. The wettability parameters were measured, including contact angle, spread area, adhesion energy, and surface tension. Extreme vertices mixture design approaches were used to develop 13 different electrode coatings. To determine the contact angle at solid/liquid interface, circular pellets were made from powder samples and heated inside the furnace at 1125°C at a constant heating rate. Young's and Boni's equations are used to calculate the surface tension value for 13 coated samples using the calculated contact angle. Adhesion energy for 13 coated samples is calculated using Dupre's equation. Phases and structural behavior of coating samples were measured by Fourier transform infrared spectroscopy and X-ray diffraction. The developed regression model estimates the impact of primary ingredients and their interaction on the calculated wettability characteristics. CaF2.SiO2, CaO.SiO2, and CaO.CaF2 binary mixture is the more favorable and substantially impacts contact angle, whereas ternary interactions of CaO.SiO2.CaF2 shows an opposite effect on contact angle. Coating numbers 2 and 10 give better wetting behavior and spread area due to the low value of contact angles. Individual ingredient shows an increasing effect on surface tension and adhesion energy. Ternary component of CaO.CaF2.SiO2 is favorable and shows an increasing impact on adhesion energy.Keywords
This publication has 37 references indexed in Scilit:
- Effect of Al2O3 and MgO on Interfacial Tension Between Calcium Silicate‐Based Melts and a Solid Steel SubstrateSteel Research International, 2012
- In situ droplet surface tension and viscosity measurements in gas metal arc weldingJournal of Physics D: Applied Physics, 2012
- Characterization of microstructures and mechanical properties of Inconel 617/310 stainless steel dissimilar weldsMaterials Characterization, 2011
- Estimation of Surface Tension of Molten Silicates Using Neural Network ComputationISIJ International, 2007
- Evaluation of the Surface Tension of Ternary Silicate Melts Containing Al2O3, CaO, FeO, MgO or MnOISIJ International, 2007
- The densities and the surface tensions of fluoride melts.ISIJ International, 1989
- Physical and Chemical Behavior of Welding FluxesAnnual Review of Materials Science, 1986
- Extreme Vertices Design of Mixture ExperimentsTechnometrics, 1966
- Phase Equilibrium Diagram CaO—CaF 2 —2CaO.SiO 2Journal of the American Ceramic Society, 1965
- Fluxes and slags in weldingTransactions of the Faraday Society, 1924