High Throughflow StreamVane Swirl Distortion Generators: Design and Analysis
- 8 December 2023
- journal article
- research article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 146 (4) , 1-64
Abstract
In recent years, the StreamVane technology has developed into a mature and streamlined process that can reproduce swirl distortion for ground-test evaluation of fan and compressor performance and durability. A StreamVane device consists of complex turning vanes that accurately output a distorted secondary velocity field at a defined distance downstream. To further advance the applications and conditions in which these devices operate, a research effort was developed and completed to investigate methods to increase critical Mach numbers. The effort was split into three separate stages: (1) Perform high fidelity computational fluid dynamics (CFD) to identify peak Mach number locations within twin and quad swirl vane pack designs; (2) conduct thorough literature reviews on relevant high throughflow techniques; and (3) design and implement selected techniques to evaluate improvements using the same high-fidelity CFD methods. It was predicted that employing blade lean within high-speed vane junctions increased critical Mach numbers by 6.6%, while blade sweep resulted in a 3.5% increase. The results and conclusions from this effort are presented throughout this paper with a primary focus on comparing Mach numbers and swirl profiles between vane packs with and without high throughflow designs.Keywords
Funding Information
- Air Force Research Laboratory (ARCTOS P030-00314; Subcontract Agreement 212014.05.00.2016.00.11-C1)
This publication has 18 references indexed in Scilit:
- Compressor Performance and Operability in Swirl DistortionJournal of Turbomachinery, 2011
- The Influence of Sweep on Axial Flow Turbine Aerodynamics in the Endwall RegionJournal of Turbomachinery, 2008
- Procedure for Estimation and Reporting of Uncertainty Due to Discretization in CFD ApplicationsJournal of Fluids Engineering, 2008
- An experimental study of reverse compound lean in a linear turbine cascadeProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2005
- Using Sweep and Dihedral to Control Three-Dimensional Flow in Transonic Stators of Axial CompressorsJournal of Turbomachinery, 2000
- Two-equation eddy-viscosity turbulence models for engineering applicationsAIAA Journal, 1994
- The Influence of Blade Lean on Turbine LossesJournal of Turbomachinery, 1992
- A Study on Juncture FlowsJournal of the Society of Naval Architects of Japan, 1992
- Numerical study of the turbulent flow past an airfoil with trailing edge separationAIAA Journal, 1983
- The Influence of Sweep and Dihedral in Turbomachinery Blade RowsJournal of Mechanical Engineering Science, 1971