Spark Plasma Sintering of Commercial Zirconium Carbide Powders: Densification Behavior and Mechanical Properties
Open Access
- 10 September 2015
- Vol. 8 (9) , 6043-6061
Abstract
Commercial zirconium carbide (ZrC) powder is consolidated by Spark Plasma Sintering (SPS). Processing temperatures range from 1650 to 2100 °C. Specimens with various density levels are obtained when performing single-die SPS at different temperatures. Besides the single-die tooling setup, a double-die tooling setup is employed to largely increase the actual applied pressure to achieve higher densification in a shorter processing time. In order to describe the densification mechanism of ZrC powder under SPS conditions, a power-law creep constitutive equation is utilized, whose coefficients are determined by the inverse regression of the obtained experimental data. The densification of the selected ZrC powder is shown to be likely associated with grain boundary sliding and dislocation glide controlled creep. Transverse rupture strength and microhardness of sintered specimens are measured to be up to 380 MPa and 24 GPa, respectively. Mechanical properties are correlated with specimens’ average grain size and relative density to elucidate the co-factor dependencies.Keywords
Funding Information
- US Department of Energy (DE-SC0008581)
This publication has 51 references indexed in Scilit:
- Properties of zirconium carbide for nuclear fuel applicationsJournal of Nuclear Materials, 2013
- Localized Overheating Phenomena and Optimization of Spark-Plasma Sintering Tooling DesignMaterials, 2013
- Pressureless sintering of ZrC-based ceramics by enhancing powder sinterabilityInternational Journal of Refractory Metals and Hard Materials, 2011
- A study of the densification mechanisms during spark plasma sintering of zirconium (oxy-)carbide powdersActa Materialia, 2010
- Densification mechanisms in spark plasma sintering of nanocrystalline ceramicsMaterials Science and Engineering: A, 2007
- Sintering behaviour and microstructures of carbides and nitrides for the inert matrix fuel by spark plasma sinteringJournal of Nuclear Materials, 2006
- Sintering activation by external electrical fieldMaterials Science and Engineering: A, 2000
- Temperature dependence of hardness in silicon–carbide ceramics with different porosityInternational Journal of Refractory Metals and Hard Materials, 1999
- Porosity-dependence of elastic moduli and hardness of 3Y-TZP ceramicsCeramics International, 1999
- Hot-pressing kinetics of zirconium carbideJournal of Materials Science, 1986