Biprobes Blade Tip Timing Method for Frequency Identification Based on Active Aliasing Time-Delay Estimation and Dealiasing
- 12 April 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 70 (2) , 1939-1948
Abstract
Rotating blades are key turbomachinery components with high failure risk due to harsh working conditions. Thus, monitoring the running state of blades is urgently required. Blade tip timing (BTT) is regarded as a potential technology for blade vibration monitoring owing to its noncontact nature and low cost. However, severe undersampling and strict probe layout hinder the application of BTT. As a result of severe undersampling, aliasing and its suppression are the main research topics in BTT. However, in this article, a biprobes method for BTT based on the utilization of aliasing is proposed to identify the natural frequencies of blades. Active aliasing is used in this method to produce aliasing findings at various equivalent sampling frequencies, and the closed-form robust Chinese remainder theorem is used for dealiasing. Unlike the conventional multirate sampling systems for BTT that use a multiprobe configuration or varied speed, the suggested method utilizes varying delay durations to obtain varying equivalent sample frequencies. Furthermore, to ensure that active aliasing and dealiasing form a closed loop, an included angle coprime layout is proposed. Finally, the robustness and effectiveness of the proposed method are verified through numerical and experimental validation.Keywords
Funding Information
- National Key Research and Development Program of China (2020YFB2010800)
- National Natural Science Foundation of China (51875433, 92060302)
- Natural Science Foundation of Shaanxi Province (2019KJXX-043, 2021JC-04)
- Fundamental Research Funds for the Central Universities
- Foundation of Beilin District (GX2029)
This publication has 18 references indexed in Scilit:
- Compressed sensing based on dictionary learning for reconstructing blade tip timing signals2017
- A Discussion on the Advancement of Blade Tip Timing Data Processing2017
- Sparse reconstruction of blade tip-timing signals for multi-mode blade vibration monitoringMechanical Systems and Signal Processing, 2016
- Gas Turbine Engine Health Management: Past, Present, and Future TrendsJournal of Engineering for Gas Turbines and Power, 2014
- A Closed-Form Robust Chinese Remainder Theorem and Its Performance AnalysisIEEE Transactions on Signal Processing, 2010
- Nonintrusive turbomachine blade vibration measurement systemMechanical Systems and Signal Processing, 2007
- Health monitoring and prognostics of blades and disks with blade tip sensors2002
- A comparison of blade tip timing data analysis methodsProceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2001
- Noncontact vibration measurements on compressor rotor bladesMeasurement Science and Technology, 2000
- Use of the symmetrical number system in resolving single-frequency undersampling aliasesIEEE Transactions on Signal Processing, 1997