Tribological Characteristics of Ti–Al– N, Ti–Al– Ni–N, Ti–Cr–Ni–N, and Ti–Cr–Ni–Mo–N Strengthening Coatings on Steel 20Kh13 in a Friction Pair with Carbon Fiber and Their Corrosion Resistance
- 3 June 2024
- journal article
- research article
- Published by Pleiades Publishing Ltd in Inorganic Materials: Applied Research
- Vol. 15 (3) , 728-736
Abstract
—The possibility of using Ti–Al–N, Ti–Al–Ni–N, Ti–Cr–Ni–N, and Ti–Cr–Ni–Mo–N coatings deposited by ion-plasma vacuum-arc deposition as protective on products made of steel 20Kh13, working in a friction pair with carbon fiber plastic of the UGET grade in contact with seawater, has been investigated. An improvement in the resistance properties of a steel surface is shown when using coatings of the Ti–Al–Ni–N, Ti–Cr–Ni—N, and Ti–Cr–Ni–Mo–N systems. And the products without or with Ti–Al–N coating showed high friction wear rates (109.21 × 10–5 and 19.24 × 10–5 mm3/(N m), respectively), as well as active oxidation during electrochemical tests under conditions of interaction with a medium simulating seawater (3% NaCl solution). Specimens with Ti–Al–Ni–N, Ti–Cr–Ni–N, and Ti–Cr–Ni–Mo–N coatings did not demonstrate significant wear during friction when paired with carbon fiber. Electrochemical tests of the coatings showed that they were self-passivated and there was no pitting on the surface of the coated specimens. On the basis of the analysis of the data obtained, a conclusion was made about the high efficiency of the studied coatings as protective for work in contact with seawater.Keywords
This publication has 20 references indexed in Scilit:
- Corrosion and tribocorrosion behavior of ZrO2-Al2O3 composite coatings developed by plasma electrolytic oxidation for load-bearing implantsJournal of Alloys and Compounds, 2022
- Effect of tribological process parameters on the wear and frictional behaviour of Cr-(CrN/TiN) composite coating: An experimental and analytical studyCeramics International, 2021
- Internal stress on adhesion of hard coatings synthesized by multi-arc ion platingSurface and Coatings Technology, 2017
- Titanium implants’ surface functionalization by pulsed laser deposition of TiN, ZrC and ZrN hard filmsApplied Surface Science, 2017
- Thermal stability and chemical resistance of (Ti,Al)N-Cu and (Ti,Al)N-Ni metal-ceramic nanostructured coatingsApplied Surface Science, 2016
- The effect of Cu and Ni on the nanostructure and properties of arc-PVD coatings based on titanium nitrideSurface and Coatings Technology, 2014
- The microstructure and mechanical properties of TiNNi nanocomposite thin filmsSurface and Coatings Technology, 2013
- Effect of Mo and Co additions on the microstructure and properties of WC-TiC-Ni cemented carbidesInternational Journal of Refractory Metals and Hard Materials, 2012
- The composition of Standard Seawater and the definition of the Reference-Composition Salinity ScaleDeep Sea Research Part I: Oceanographic Research Papers, 2008
- Effect of the Cr content on the mechanical properties of nanostructured TiN/CrN coatingsSurface and Coatings Technology, 2004