280-GHz schottky diode detector in 130-nm digital CMOS
Authors:
- 1 September 2010
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Abstract
A 2 × 2 array of Schottky-barrier diode detectors with an on-chip patch antenna and a preamplifier is fabricated in a 130-nm logic CMOS process. Each detector cell can detect the 25-kHz modulated 280-GHz radiation signal with a measured responsivity and noise equivalent power (NEP) of 21kV/W and 360pW/√Hz, respectively. At 4-MHz modulation frequency, NEP should be about 40pW/√Hz. At supply voltage of 1.2V, the detector consumes 1.6mW. By utilizing the detector, a millimeter-wave image is constructed, demonstrating its potential application in millimeter-wave and THz imaging.Keywords
This publication has 8 references indexed in Scilit:
- Towards terahertz operation of CMOS2009
- A 600-GHz CMOS focal-plane array for terahertz imaging applications2008
- Schottky barrier diodes for millimeter wave detection in a foundry CMOS processIEEE Electron Device Letters, 2005
- Plasma wave detection of sub-terahertz and terahertz radiation by silicon field-effect transistorsApplied Physics Letters, 2004
- Fundamentals of Terrestrial Millimeter-Wave and THz Remote SensingInternational Journal of High Speed Electronics and Systems, 2003
- Passive millimeter-wave imaging for airborne and security applications2003
- Terahertz technologyIEEE Transactions on Microwave Theory and Techniques, 2002
- Quantitative Comparison of Solid-State Microwave DetectorsIEEE Transactions on Microwave Theory and Techniques, 1966