Dynamic Vulcanization of Thermoplastic Copolyester Elastomer/Nitrile Rubber Alloys
Authors:
- 1 January 1993
- journal article
- Published by SAGE Publications in Journal of Elastomers & Plastics
- Vol. 25 (1) , 74-89
Abstract
New thermoplastic elastomers, copolyester (CPET)/nitrile rubber (NBR) alloys, were developed by using various dynamic vulcanization tech niques, such as internal mixing, open mill mixing, and twin screw extrusion, or their combinations. The effects of the various manufacturing techniques on rheological and mechanical properties were compared. The study showed that the dynamic vulcanization method by a twin screw extruder is most suitable for the manufacture of CPET/NBR elastomeric alloys.Keywords
This publication has 8 references indexed in Scilit:
- Effects of curing conditions on the properties of the dynamically cured EPDM/HDPE blendsPolymer Bulletin, 1989
- Dynamic mechanical properties of thermoplastic elastomers from polypropylene–natural rubber blendJournal of Applied Polymer Science, 1986
- Studies on the melt flow behavior of thermoplastic elastomers from polypropylene—Natural rubber blendsPolymer Engineering & Science, 1985
- Rubber-Thermoplastic Compositions. Part V. Selecting Polymers for Thermoplastic VulcanizatesRubber Chemistry and Technology, 1982
- Rubber-Thermoplastic Compositions. Part IV. Thermoplastic Vulcanizates from Various Rubber-Plastic CombinationsRubber Chemistry and Technology, 1981
- Rubber-Thermoplastic Compositions. Part III. Predicting Elastic Moduli of Melt Mixed Rubber-Plastic BlendsRubber Chemistry and Technology, 1981
- Rubber-Thermoplastic Compositions. Part II. NBR-Nylon Thermoplastic Elastomeric CompositionsRubber Chemistry and Technology, 1980
- Rubber-Thermoplastic Compositions. Part I. EPDM-Polypropylene Thermoplastic VulcanizatesRubber Chemistry and Technology, 1980